Telehandler is valuable addition to large feedlot V723 handles 10,000 hay bales each year
Managing a 24,000-acre agricultural enterprise that includes a 6,000-head capacity feedlot and a fully-computerized feeding system requires making sure small problems don’t turn into big problems.
The farm has been owned by the Petsch family of Meriden, Wyo., since 1935. Located in southeastern Wyoming, near the borders of Nebraska (10 miles) and Colorado (35 miles), about 21,000 acres is grassland, 1,500 acres is irrigated crop ground and 1,500 acres is irrigated hay. Both center pivot and surge valve irrigation systems are used.
For the Petsch family, the decision of what to do about a 9-year-old telehandler became easier two years ago when it was destroyed in a hay fire.
“We looked at a couple of different brands,” says Irv Petsch, who owns Y6 Feeders with his sons, Trevor and Brady, and nephews, Rowdy and David. “After demonstrations at our feedlot, we decided the VersaHandler®
V723 was the best value — giving us
more machine for less cost. We’ve been very satisfied with our choice.”
“We looked at a couple of different brands. After demonstrations at our feedlot, we decided the VersaHandler V723 was the best value — giving us more machine for less cost.” — Irv Petsch
Improved cooling
Compared with the unit it replaced, the more powerful V723 — purchased from Sandberg Implement — handles the dusty and dirty work environment much better.
“The other machine would constantly overheat,” Petsch says. “The dust associated with moving hay bales — up to 10,000 annually — caused us to take it into our shop every other day and clean it.
“On the other hand, we bring the V723 into the shop only about once a month for routine cleaning. That’s because of the optional reversable fan — a great feature. Occasionally, the operator presses a button to reverse the fan to blow everything out. It makes a tremendous difference.”
The telehandler is used daily to unload feedstuffs and other supplies delivered to the feedlot and to clean manure from the pens. About 90 percent of its time is
24 WorkSaver Fall 2010
Y6 Feeders owner Irv Petsch can’t be without his dependable V723 because of its lifting and placing abilities on his farm.
spent handling large bales of hay, both round and square. Hay is stacked four bales high, in the 15-to-20-foot range, often on hills.
Y6 Feeders also owns a Bobcat® 753 loader and a 341
excavator, both which have proven to be very useful around the feedlot and played a role in the telehandler purchase.
“These two machines are very durable,” Petsch says. “That’s one of the reasons we went with the Bobcat telehandler. Where we live is a long way from everywhere. We need dependable equipment that is ready to work every day.”
Read more online about Bobcat telehandlers. Visit
www.MyWorkSaver.com/telehandler to find product specs, option packages and approved attachments.
Frame-level feature
“Operating on hills is where the frame leveling feature of the V723 really comes in handy,” Irv Petsch says. “We can hydraulically level the machine up to six degrees right or left to help center the load on uneven terrain and more accurately place the bales.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32