OREGON®, CARLTON®, STIHL AND WINDSOR® CHAIN CROSS-REFERENCE CHART
This chart makes no comment whatsoever regarding the safety, or suitability for any particular purpose, of ANY saw chain not manufactured by OREGON®. Read and follow all notes below to properly use this chart.
NOTES: • This chart is intended for use by only those who wish to replace other brands of saw chain with a comparable OREGON® chain. • Many saw chains are interchangeable in terms of their fit-up, but interchanging certain types of chains may be inappropriate for some users. Be certain that the chain chosen is appropriate for both the use, and for the user’s level of experience.
• For information on compliance with the low-kickback performance requirements of ANSI B175.1, or on other safety issues as they pertain to ANY Carlton, Stihl or Windsor chain: see the documents on saw chain safety provided by those companies.
• This chart should not be used to replace OREGON® saw chain with any other brand of chain. Doing so is a misuse of this chart and those who do so assume any and all risks associated with such misuse. • OREGON® saw chain part numbers shown in bold italic have been obsoleted.
STIHL® GAUGE GRIND CUTTER TYPE SEQUENCE .050" Round Micro Chisel® Standard 25AP
.043" Round Chamfer Round Chamfer
.050" Round Chamfer Chamfer Chamfer Chamfer
.050" Round Chisel Chisel
Standard 90SG Standard 90S Standard 91VG Standard 91VX Standard 91VXL Standard M91VX
Standard 33SL
Micro Chisel® Standard 95VPX Chisel
.058" Round Chisel Chisel
Micro Chisel® Standard 95R Standard 34SL
Chisel
.063" Round Chisel Chisel
P/N 13RM ALT P/N P/N E1MC-BL
61PMN 61PMMMC3 N4C-BL 63PM1
63PMC3
63PM 63PM
23RMC3 23RM2
Micro Chisel® Standard 20BPX 23RMC Standard 20LPX 23RS Standard M20LPX
25RMC3 25RM2
Micro Chisel® Standard 21BPX 25RMC Standard 21LPX 25RS Standard M21LPX Standard 35SL
Chisel 26RMC3 26RM2
Micro Chisel® Standard 22BPX 26RMC Standard 22LPX 26RS Standard M22LPX