MICRO-LITE® AND MICRO-LITE® INTENZ BARS®
4
It takes less power from the saw to make the same length of cut with a narrow-kerf bar chain cutting system than with a standard bar and chain. Micro-Lite® is the bar for occasional woodcutters who want the advantages of a narrow-kerf cutting system.
PITCH
CHAIN NO. 90
95 BODY TYPE NOSE TYPE
Laminated Non-replaceable Nose Sprocket
NOSE RADIUS
Small MLE P/Ns Small MLB P/Ns
RECOMMENDED SAW SIZES
Electric or saws 2.4 cu. in. (40 cc) and smaller
2.2 - 3.5 cu. in (35 - 57 cc)
FEATURES • Thickness of side laminates is reduced to work with narrow-kerf chains
104MLEA218 124MLEA041 124MLEA074
INTENZ® PART NUMBERS 144MLET041
130MLBK041 130MLBK095 150MLBK041
150MLBK095 160MLBK041 160MLBK095
180MLBK041 180MLBK095
124MLEA218 144MLEA041 144MLEA074
144MLEA095 164MLEA041 164MLEA074
• Available in models with the Intenz® tensioning mechanism built into the bar itself
AVAILABLE IN TWO GAUGES: • .043"-gauge “MLE” bars for use with 3/8" 90SG chain • .050"-gauge “MLB” bars for use with .325" 95VP chain (NEVER install .043"-gauge chain on a .050"-gauge bar)
NOTE: Always install a Micro-Lite® bar together with a Micro-Lite® chain in order to obtain all the advantages of narrow-kerf cutting.
LENGTHS
10" - 16" (25 - 41 cm)
13" - 20" (33 - 50 cm)
HARVESTER BARS
Specialized bars for use on mechanized harvesters are also available. See the OREGON® Harvester Application Guide (available separately). Visit our website at www.oregonchain.com or contact your authorized OREGON® distributor for information on harvester bars.
Bar part numbers printed in red have been obsoleted. Contact your authorized OREGON® distributor for availability. Guard Mate® holes are built into the noses of certain types of OREGON® guide bars and allow the attachment of a Guard Mate® tip guard to help reduce the risk of kickback. *Lubri-Dam® and Lubri-Jet® oiling features may not be a standard feature on certain bars depending on the date of manufacture or bar type.