Security
Paxton Access, the leading Paxton Access, the leading manufacturer of access control
manufacturer of access control systems, introduces Net2 plus
systems, introduces Net2 nano
Net2 plus is the dynamic new addition to take advantage of its increased func-
to the Paxton Access Net2 family; a single tionality, future proofing your investment.
door access control unit with advanced
functionality. Net2 plus represents Paxton
Net2 plus is the perfect control unit for
Access’ dedication to developing forward
installations where requirements may
thinking access control products that grow over time.
exceed their customers’ expectations.
Net2 plus can also be mixed with Net2
Net2 nano demonstrates Paxton Access’ Net2 plus has an on-board RJ45 socket
nano and Net2 classic control units on a
commitment to developing intelligent access so it can be connected to a TCP/IP
site for the most effective solution for each
control products relevant and useful for network in the same way as any other IP
situation.
today’s security industry. Net2 nano is a new device. This reduces equipment costs and
wireless single door access control unit installation time for projects where there is Adam Stroud, Sales and Marketing
designed to extend the possibilities of Net2, an existing computer network. Director at Paxton Access, says: “The
Paxton Access’ networked access control
system.
The Net2 plus control unit can also be
Net2 plus control unit has on-board
used as a TCP/IP to RS485 converter.
TCP/IP meaning that it just pops straight
Net2 nano removes the need for
Net2 plus plugs straight into the network
onto the network. Not only is this very
hardwiring between door controllers and a
and a dedicated cable can be run to an
convenient for installation but it also
PC by replacing a wired connection with a
additional daisy chain of Net2 classic removes the need for an expensive TCP/IP
wireless one. Simply connect a Net2Air USB
control units. to RS485 adapter. I believe that Net2
bridge to the Net2 server PC and it will pick
up and communicate with the Net2 nano
This makes it ideal for extending Net2 if
plus will appeal to the growing number of
control units in range. There is a secure
wiring proves difficult or it is not possible
installation companies familiar with
pairing procedure to ensure that nobody
to get a network point exactly where you
TCP/IP networking.”
want it.
else can connect to your control units.
For more information tel: 01273
As the specifications of the control unit
811011 or outside UK +44 1273
Extremely economical; Net2 nano can be
are developed, existing sites will be able 811011
used to secure all doors on small sites
Q 027
quickly and easily, reducing installation cost
and making it perfect for open plan office
layouts. If greater distances need to be
covered and there is an existing LAN/WAN
then a Net2Air Ethernet bridge can be used.
The unit plugs into a standard RJ45 network
port and can be placed around a site and
linked back to the PC via the LAN/WAN.
A limit of 10 Net2 nano control units per
Ethernet or USB bridge and a maximum of
200 Net2 nano control units per site is
Paxton Access showed their newly released access
recommended.
control units, Net2 plus and Net2 nano, at IFSEC 2009
Ever adept at creating smart solutions to
make installation easy, Paxton Access has
also designed the Net2Air site surveyor kit;
Released to the market in April, these
the essential tool for faultless Net2 nano
eagerly awaited additions to the Net2
installation. The site surveyor checks signal
range provide even more flexibility
strength between the Net2 nano and a
when specifying or installing an access
Net2Air bridge prior to installation which
control system.
means installers are guaranteed total
Net plus and Net2 nano have been
accuracy when fitting a Net2 nano.
designed to extend the possibilities of
Adam Stroud, Sales and Marketing
Net2, Paxton Access’ networked access
Director at Paxton Access, says: “Net2 nano
control system.
can be used in conjunction with our Net2 Net2 plus is a new control unit for the
plus and Net2 classic control units for Net2 access control system. It has an
access points that are tricky to cable to such on-board RJ45 socket to connect to a
as gates, barriers and remote buildings. Of TCP/IP network in the same way as any
course Net2 nano control units can be used other IP device, removing the need for
exclusively on a site doing away with the a separate piece of hardware. This
need for any network cable at all. Because diverse control unit can also be used as
the wireless environment is different at every a TCP/IP to RS485 converter for when
site, we strongly recommend installers use it is not possible to get a network point
USB bridge to the Net2 server PC and it
our Net2Air site surveyor tool before exactly where you want it. While the
will pick up and communicate with the
installing.” current specification of Net2 plus is the
Net2 nano control units in range. A limit
same as the other Net2 control units, it is
For more
of 10 Net2 nano control units per
likely to be increased in the future. Using
information tel:
Ethernet or USB bridge and a maximum
Net2 plus means your client’s investment
01273 811011
of 200 Net2 nano control units per site is
is future proofed. As Net2 plus develops,
or outside UK
recommended.
existing sites will be able to take
+44 1273
advantage of its increased functionality.
Paxton Access demonstrated both of
811011
these fantastic new products, on their
Net2 nano is a wireless control unit for
stand at IFSEC.
the Net2 access control system. Net2
nano removes the need for hardwiring
For more information tel: 01273
between door controllers and a PC by
811011 or outside UK +44 1273
replacing a wired connection with a
811011
Q 026 wireless one. Simply connect a Net2Air Q 028
9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32