SR2500
Complete drop-in assembly design which works well with low to moderate
temperature applications with low levels of particulate accumulation.
■
Economic frame using standard angle sizes
■
Accessibility to bolting hardware
■
Accepts shop welded flow liner
■
SR2500
Designed for internal (SR2550) or external belt replacement (SR2500)
■
Used frequently with fan applications
■
Studs or tack welded nuts are optional on belt flange
SR2600
Similar to the SR2500 style and is used where additional standoff is necessary or
SR2550
preferred. This design works well in low to moderate temperature applications with
low levels of particulate accumulation.
■
Economic frame using standard angle sizes
■
Fabric wrap design used to retrofit over existing metal expansion joints
(possible on-line installation)
■
Complete assembly drop-in design
■
Designed for internal (SR2650) or external belt replacement (SR2500)
■
Used frequently with fan applications
SR2600
■
Accepts shop welded flow liner
■
Studs or tack welded nuts are optional on belt flange
SR2700
Used for low-to-high temperature applications with a cavity pillow, where high levels
SR2650
of particulate are present.
■
Accommodates both flanged and non-flanged ductwork
■
“Z” style with integral telescoping flow liners
■
Reduces particulate accumulation in frame cavity
■
Provides protection for belts and pillows
■
Complete accessibility to bolting hardware
■
Accepts eared pillow design
■
Accommodates large lateral movements
■
Tack welded nuts are optional
■
Provides proper setback for belt protection
SR2700
SR2750
Similar to SR2700 with the exception of a single integral flow liner. This design
works well with lower particulate levels or vertical duct applications.
■
Accommodates both flanged and non-flanged ductwork
■
“Z” style integral upstream flow liner
■
Provides protection for belts and pillows
■
Complete accessibility to bolting hardware
■
Accommodates large lateral movements
■
Tack welded nuts are optional
■
Provides proper setback for belt protection
SR2750
Senior Flexonics Pathway expansion joints are furnished assembled or unassembled.
13
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32