TIME COMPRESSION 79
Surviving the downturn: keep calm and carry on producing
Tim Heller explores how additive fabrication technology can help big and small manufacturers to add efficiency to design and production without stifling innovation.
T
he economic downturn is definitely affecting all aspects of the manufacturing industry. Job cuts and budget freezes are happening throughout the industry – from designers and
engineers through to the production line itself. But despite the decline in confidence, manufacturing
companies still need to carry on producing. They have to do business with less, which means greater efficiency at a lower cost. But what does this mean? Is this an end to new designs
and development, or simply a short term shift in priorities? With news of the
increasing decline in manufacturing and job cuts in the automotive industry, it is easy to think that the design and development industry is heading for dire straits. The recession may mean a reduction in projects and a call for leaner processes, but most manufacturers are not halting production altogether. In the last economic downturn, this need for greater efficiency and innovation meant that some makers of additive fabrication equipment for direct digital manufacturing (DDM) fared well, as the technology provided a viable, cost effective solution. Large and small manufacturers alike have low-volume manufacturing needs, for which DDM is suited. For example, automotive manufacturers have on average 400 unique assembly tools, and each one in low quantities. Many manufacturers make products in quantities of a few thousand or less and an increasing number are producing customised products in low volumes. These lower production volumes do not necessarily
speeding up the production of parts, while allowing them to make design changes and customise parts during the production process. Besides performing DDM, manufacturers can use the
same additive fabrication technology to manufacture prototypes and help cut development costs. The same machine that builds final parts can produce fully functional prototypes for testing – saving costs and time, by bringing rapid prototyping in-house. The largest savings comes from the reduction in tooling costs and tooling rework, because in-house rapid prototyping allows the components’ designs to be proven and perfected prior to machining a tool. Another fundamental advantage of additive
“Because DDM uses an additive process to manufacture the parts, it is much easier to produce complex designs than traditional manufacturing processes.”
fabrication is the freedom of design that it allows. Using this fabrication process to produce parts means that a design engineer can essentially reject the rules that apply to ‘designing for manufacturability’ and focus on the function a part needs to perform. Design is no longer constrained by the limitations of conventional processes, such as injection moulding. DDM frees the product development team to design the perfect part for the application – without having to worry about adding costs or
Tim B Heller,
Managing Director, Stratasys EMEA
slowing down the project. For example, wall thickness can be varied throughout a DDM part and sharp corners can be included, rather than relying on using only rounded corners required for injected moulded parts. As opposed to designing for manufacturability,
designing the best part for a given function is suitable whether manufacturers are cost-cutting or not, and DDM can make this happen. Its speed and ease of use means that multiple iterations of a design can be tried and tested – and changed – during the production process without losing valuable time and money. In short, DDM is a valuable investment to help
mean higher cost per part or sacrificing design and detail. Because DDM uses an additive process to manufacture the parts, it is much easier to produce complex designs than traditional manufacturing processes. Detailed parts do not take longer or cost more, as they often do with conventional manufacturing methods. In fact, the technology can help manufacturers manage tighter budgets. DDM also gives manufacturers the advantage of
designers and manufactures through lean times, but its flexibility and speed mean that even as the economy improves, an additive fabrication machine will never be one to sit and gather dust on the shopfloor. n
Enter 79 or ✔ at
www.engineerlive.com/ede
Tim B. Heller is the managing director of Stratasys EMEA, Frankfurt am Main, Germany.
www.stratasys.com
www.engineerlive.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84