assembly / testing / Qc / nitrox
Every Atomic regulator is stringently tested on a breathing
machine to a simulated diving depth of 165 feet.
Do I really need a regulator that
can perform to a depth beyond
300 feet?
YES. We design our regulators to perform as deep as possible
while maintaining breathing stability. Our regulators deliver stable
breathing below 300 feet, even though safe sport diving limits
are 130 feet. Atomic designs and tests our regulators to depths
beyond sport diving limits to provide you an extra margin of
safety. You will never feel excessive breathing resistance at any
breathing rate or well below sport diving depths.
Why Is White-Room-Clean
Assembly Important?
Comprehensive testing records are maintained for
We never forget we are making life support equipment.
each Atomic regulator and can be referenced by
Our assembly technicians build each regulator one at a time.
serial number if ever needed.
We hand assemble every regulator in a white room-clean
environment. Each regulator is then final tested to a depth
of 165 feet under simulated diving conditions conducted in
one of our computerized breathing simulators.
Atomic Regs Are Designed & Tested For Nitrox Diving
Every Atomic reg model is carefully NEW Atomic T2X Titanium (Available early 2009)
lab tested and approved as safe for
This new flagship model is approved as SAFE for
EAN mixtures Non-dedicated EAN up to 40% O2.
Atomic Aquatics has diligently designed our regulator models
for virtually any diving scenario in which Enriched Air Nitrox
Atomic ST1/B2/Z2
(EAN) can be safely used. Our regs have been independently SAFE for Non-dedicated EAN up to 40% O
2
lab tested to meet the stringent ASTM G-175 requirements for
These Atomic models may be used interchangeably with
positive ignition testing. The test is based on trying to start an
compressed air or EAN mixtures up to 40% Oxygen at
ignition or fire inside the regulator by using an ignition "pill." The
3500 psi maximum.
pill is designed to burn like a fuse on a firecracker and releases
flaming particles inside the regulator. In a reg that is properly
designed for Nitrox, the fire from the pill will not damage or
excessively burn any internal regulator component part. Each
Special Nitrox Diving
Atomic reg model has been tested and passed the ASTM
Atomic M1
G-175 requirement before we certify it as SAFE for EAN. SAFE for dedicated EAN up to 80% O
2
SAFE for non-dedicated EAN up to 50% O
Please select from the following guidelines
2
to choose the Atomic reg model that is The Atomic M1 model is designed to handle special Nitrox
approved as SAFE for your EAN mixture.
diving mixtures up to 80% Oxygen on a strictly dedicated
basis. When used with high-precentage EAN mixtures, the M1
Atomic T2
must not exceed 80% Oxygen at 3000 psi maximum and must
The T2 is factory approved for Nitrox up to 40% but should
be kept in an Oxygen-clean condition. The M1 may be used
be dedicated for Nitrox use unless you are certain both your
interchangeably with compressed air or EAN mixtures up to
air and EAN mixtures comply with minimum dive industry
50% Oxygen at 3500 psi maximum. The M1 is the best choice
purity standards.
if you dive in areas where clean air standards are uncertain.
9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68