gas industry. A special carbide- pin locating system is featured combined with a patented pocket seat surface pattern and high- pressure coolant capabilities. The locating system uses two horizontally oriented pins that rest at specifi c distances from the
bottom of the insert pocket. The exact points on the insert where these pins make contact are the same points that Seco works with when grinding the insert’s threading profi le. Seco Tools LLC Ph: 248-528-5200 Web site:
www.secotools.com/us
Air Tool with Flexible Shaft With a redesigned pneumatic drive, the LRC 20 offers a set of hand tools that can grind, mill and polish places that previously could be accessed only with great diffi culty. The unit provides 20,000 rpm for user handwork. The system is offered with
extensions that can be attached to the machine for each appli- cation. Only 13 mm in diameter,
the extension elements are very thin. They are powered by a long-life fl exible shaft. The special highlight: the extension ele- ments are unique in that they can be bent through 45° and so can really reach the deep pockets and corners on workpieces. Suhner Industrial Products LLC Ph: 706-235-8046 We site:
www.suhner.com
Collet Holder HDZ collet holders provide better surface roughness and invariant hole diameters than standard collet holders, making them well suited for smooth fi nishing with ball end mills or reamers. The four-point adjustment system is simple, and the full procedure can be completed in less than a minute. Setup only requires a spanner to tighten the collet, and an adjust- ment wrench for the runout-adjustment screws. The adjust- ment ring can be rotated, allowing runout to be adjusted from any angle. HDZ holders use the company’s 12° taper FDC collets. NT USA Corp. Ph: 615-771-1899 Web site:
www.nttoolusa.com
Coolant-Through Tooling A coolant-through feature is now available on all of Heimatec’s current line items. This feature can help provide faster, cleaner cutting on larger and deeper parts, where the chips and excess heat buildup are signifi cant
challenges. The high-pressure coolant-through
designs deliver up to 1000 psi (6.9 MPa) on straight and 2000 psi (13.8 MPa) on angle head tools. A full range of styles and pressures is available immediately. Heimatec Inc. Ph: 847-749-0633
E-mail:
phansen@heimatecinc.com
Magnetic Filtration Systems Sub-micron filtration for industrial fluids
Clearly better... 100%
www.eclipsetoolsinc.com •
sales@eclipsetoolsinc.com January 2016 |
AdvancedManufacturing.org 107
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116