This page contains a Flash digital edition of a book.
METALCASTING SUPPLIES Spray Gun for Masking, Coating Applications


Dymax Corp., Torrington, Conn., has introduced the SG-200 Super-Flow Spray Gun System designed for masking and coating applications with high flow rates. Capable of flow rates of 2.5-20 oz./min., the SG-200 helps op- erators maximize productivity in high-volume and large-part mask- ing and coating applications. Te


system can dispense fluids with viscosities between 5,000 and 80,000 CentiPoises (cP). Te SG-200 utilizes a normally closed, stainless steel needle valve to control fluid flow and a dual-acting air cylinder to provide immediate start and stop func- tionality. Te system’s dual-port atomizing nozzle ensures symmetrical delivery of


materials across a wide range of viscosities. Visit www.dymax.com for more information.


Lubricants for Aluminum Diecasting Operations


G.W. Smith and Sons, a Quaker Chemical Company, has announced the intro- duction of Plunger Slick 200T and Plunger Slick WB10T. Tese two new two plunger lubricants are formulated for aluminum diecasting operations. Engineered chemistries provide boundary protection for plunger tips and shot sleeves. Key benefits include strong adherence to the plunger tip, extended tip and sleeve life,


reduced cycle times and clean, bright castings. Visit www.gwsmithandsons.com for more information.


Nonferrous Cross-Cutting System


Te TigerSaw 1000 from TigerStop, Van- couver, Wash., is an automated, integrated cross-cutting solution for aluminum and other nonferrous metals. It features an 18-in. saw and an accurate pusher system for single piece flow or pack sawing ap- plications up to 26 in. TigerSaw 1000 uses dynamic automated lineal cutting software that makes the system fast and precise, as well as a lube mister and flow controls for controlled saw-stroke cycle and superior cut quality. It automates the cross cutting process with a computer-controlled system designed to be accurate and intuitive. Te saw also allows for pack sawing multiple parts, saw blade cooling via a lube mister


and flow controls for the saw stroke cycle. Visit www.tigerstop.com for more information.


Thanks to our corporate and individual contributors…


your gifts continue to make a difference in the lives of metalcasting students and the future of this industry.


If you would like to make a year-end donation, you can go to www.bit.ly/fefdonate, use the qr code below, or


mail a check to FEF, 1695 N. Penny Ln., Schaumburg, IL 60173


www.fefinc.org 847-490-9200


All photos were taken at FEF certified schools


December 2014 MODERN CASTING | 45


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60