search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
PRODUCTS Cameras


Go-X series JAI has launched the Go-X series, industrial cameras from €289 and a six-year warranty, the longest offered by any camera manufacturer. Te series encompasses a total of 24 different


models with a range of resolutions including 2.3, 3.2, 5, 8.9, and 12.4 megapixels. Interface options include GigE Vision or USB3 Vision, supporting power-over-interface or the use of separate power supplies connected via I/O connector. Sony Pregius CMOS global shutter sensors are used, including monochrome and Bayer colour versions at each resolution. JAI has put extra emphasis on the reliability


aspects of the Go-X series. Te cameras feature high shock and vibration ratings of 80G and 10G, respectively, and are designed to dissipate heat to avoid breakdowns in industrial environments. Cameras in the series have a footprint of 29 x 29 x 51.5mm and weigh 62g. Tey undergo a rigorous dust prevention and screening process prior to shipment. All Go-X series models provide a rich set of


standard features, including region-of-interest, image flipping and mirroring, 2 x 2 decimation,


EoSens Creation Te EoSens Creation series of FPGA programmable-ready smart cameras is new from Mikrotron. Designed for multi-camera industrial automation systems, the Creation series enables engineers to embed their own IP into a Mikrotron 2-megapixel 10GigE GenICam-compliant camera. Te cameras are able to externally stream 10-bit pixel resolution images at 535fps, or internally stream 8-bit images at 2,240fps. EoSens Creation cameras offer sensitivity of


20V/Lux at 550nm. In addition, the camera’s SFP+ connection works with both copper and fibre interfaces, making it possible to install long cable runs using low-cost Ethernet cabling, switches and network interfaces. Offering an open, scalable framework, the


cameras feature a Xilinx Kintex Ultrascale FPGA plus an additional on-board 2GB DDRD of memory for edge functions such as defect pixel


Global shutter UV camera Photonfocus has introduced a global shutter CMOS UV camera. Te new model – MV4- D1280U-H01-GT – has a quantum efficiency of 40 per cent from 170 to 820nm, meaning it covers the UV, visible and near infrared spectra. Photonfocus, however, says it is designed


primarily for UV imaging applications such as laser profilometry, monitoring pantographs – the apparatus mounted on electric trains to collect power – semiconductor wafer inspection, in recycling, and UV laser or LED triangulation technology for transparent materials. Te camera has a frame rate of 140fps at


full resolution of 1,280 x 1,024 pixels. It has a 10GigE Vision interface for high-speed data


www.imveurope.com | @imveurope


transfer with cable lengths of up to 300m, and is supplied with a C-mount lens connection. UV cameras are available, although


Photonfocus says this model is the first global shutter UV camera, meaning there will be no distortion when imaging moving objects. www.photonfocus.com


8/10/12-bit output, blemish compensation and shading correction. Plus, advanced features such as two different sequencer modes and an automatic level control function for use in dynamic lighting conditions. JAI has also added four models to its


45-megapixel Spark series, and a new three- CMOS area scan camera to its Fusion series. Te Spark cameras use On Semiconductor’s XGS 45000 CMOS global shutter sensor and CXP-12 interface with maximum data transfer of 50Gb/s, while the Fusion camera simultaneously captures a monochrome image and images from two separate near-infrared bands. www.jai.com


Scarlet 3D depth camera Nerian Vision Technologies has released the Scarlet 3D depth camera, designed primarily for agricultural, bin picking, pick and place, autonomous driving and autonomous vehicle applications. Te camera reaches speeds of up to 120fps and 70 million 3D points per second; it has a resolution of 5 megapixels. Furthermore, Scarlet can process twice as large a disparity range (512 pixels) as its predecessor SceneScan Pro, resulting in double the depth resolution. Te image data is processed in real time on


an FPGA. Te result is a sub-pixel accurate disparity map – an inverse depth image – transmitted via 1 or 10 Gigabit Ethernet to a computer or embedded system. Post- processing the data includes detection of erroneous disparities and noise reduction. Nerian’s open source, cross-platform API converts this disparity map to a dense 3D point cloud. Te camera is based on Sony’s Pregius


IMX250 image sensor. In addition, a fast inertial sensor has been integrated into Scarlet, which captures motion data at up to 400Hz. Inertial data is particularly valuable for applications in mobile robotics, such as simultaneous localisation and mapping. Scarlet is IP67 rated and is available in


two versions: a 10cm baseline distance – the distance between image sensors – for measurements at close range (as close as 14cm), and a 25cm baseline distance for depth measurements at greater distances. Lenses are available from 5 to 25mm focal length. https://nerian.com


correction, gamma correction, dynamic range correction and noise reduction. By reducing the linear data flow to the host PC’s CPU, this design accelerates image pre-processing. FPGA processing can be customised with


Xilinx Vivado Design Suite software. An open platform concept provides a clear separation between the basic camera functions and the application IP to assure a straightforward development environment. www.mikrotron.de


FXO camera series SVS-Vistek has based its FXO camera series on Pregius S sensors and a10GigE interface. Te Sony sensors, with 2.74µm pixels, deliver excellent image quality with a dynamic range of 70dB. To operate at the maximum sensor frame


rate, SVS-Vistek has implemented a thermal design with dust-free, external cooling. Te multi-channel strobe controller integrated in the camera and the precise I/O module with the sequencer are addressed via GenTL. Te 10GigE interface does not require a frame grabber and is therefore very economical. For times when even more power is required, SVS-Vistek also offers the FXO models with the Coaxpress-12 interface. Te new series includes models with


resolutions from 16.1 to 24.5 megapixels, and frame rates from 30.1 to 45fps. Te cameras measure 50 x 50mm. www.svs-vistek.com


FEBRUARY/MARCH 2021 IMAGING AND MACHINE VISION EUROPE 31


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36