This page contains a Flash digital edition of a book.
UKAS accredited test laboratories offering Environmental and EMC testing all housed in one large modern building. The Faraday Test Centre is a one-stop Qualification department offering the opportunity to perform EMC and Environmental testing at one location and also providing additional services including generation of test plans and procedures and design consultancy. The Faraday Test Centre is a leader in Environmental and EMC test capabilities offering services to all industries including aerospace, defence, electronics, automotive, medical and telecommunications.


Acceleration Altitude – low pressure Bump test Centrifuges


Chamber – altitude Chamber – anechoic (RF) Chamber – EMC test Chamber – explosive decompression Chamber – hot and cold Chamber – humidity Chamber – radio interference Chamber – reverberation Chamber – salt spray DEF STAN 00-35 DEF STAN 07-55 DEF STAN 59-411 Drop testing Electro magnetic compatibility/EMC Environmental testing Explosive decompression Humidity ISO 17025 ISO 9001 MIL STD 810 Packaging drop test Pressure testing Radiated emissions Rain Rain spray RF susceptibility Salt spray Shock – mechanical Temperature Thermal shock UKAS Vibration – random Vibration – shock Vibration – sinusoidal Vibration testing Voltage dip and interrupts


Accelerated testing Acceleration Altitude – low pressure Bounce test Bump test Centrifuges


Chamber – altitude Chamber – dry cold Chamber – dry heat Chamber – explosive decompression Chamber – hot and cold Chamber – humidity Chamber – salt spray Chamber – sand and dust Chamber – vibration Chamber – walk in Climatic Data acquisition Data processing DEF STAN 00-35 DEF STAN 07-55 Drop test analysis Drop test machines Drop testing Environmental engineering consultancy Environmental testing Explosive decompression Explosive testing Explosives Fire testing – reaction to Gamma ray Humidity ISO 17025 ISO 9001 MIL STD 810 Mould testing Precipitation – inc. rain Radiography Rain Rain spray Salt spray Shock – analysis/measurement Shock – mechanical Solar radiation Strain gauge


BAE Systems Munitions Ltd Environmental Test Facility Georgetown Reception Centre Houston Road Houston Johnstone PA6 7BG Renfrewshire UK TEL +44 (0)1622 689602 EMAIL ken.inrig@baesystems.com CONTACT Ken Inrig, Manager


UKAS accredited test house offering a comprehensive commercial testing service, covering a very wide range of environments on both explosive and non-explosive items. Unique test requests welcome.


Sub-sea simulation Temperature cycling Thermal shock UKAS Vacuum Vacuum – temperature Vibration – analysis/measurement Vibration – combined Vibration – random Vibration – shock Vibration – sinusoidal Vibration testing Vibration three-axis Vibrators – electro mechanical Water immersion Weather (exposure) X-ray


Sound & Vibration


BESTEC Co Limited Unit 81-82 Kingspark Business Centre 152-178 Kingston Road New Malden KT3 3ST Surrey UK TEL +44 (0)20 8949 7006 EMAIL sales@bestecsv.com WEBSITE www.bestecsv.com CONTACT John Kim, Managing Director


BESTEC provide package testing equipment for shock, vibration, drop, impact and compression. Lansmont portable field Instruments products measure real-world dynamics, and our laboratory equipment products are used to simulate those dynamics in laboratory environments. And we also supply a wide range of real-time analyzers, and software solutions for noise and vibration measurements.


Bounce test Compression Data acquisition Noise measurement Package testing (ISTA) Packaging drop test Packaging incline impact test Shock mechanical test machines Vibration – analysis/measurement Vibration testing


Bri-Air Validation Services Ltd 26 Lloyd Road Handsworth Wood Birmingham B20 2ND West Midlands UK TEL +44 (0)121 288 6656 FAX +44 (0)121 285 2810 EMAIL info@briair.com WEBSITE www.briair.com CONTACT Hardeep Briah, Director


Bri-Air Validation Services Ltd is an independent provider of specialist cleanroom testing services to hospitals and industry. Our cleanroom validation specialists can carry out all routine cleanroom testing to meet the requirements laid down in BS EN ISO 14644 and EU cGMP.


If you would like your company to appear on TestHouseDirectory.com for 2018 please contact Concorde Publishing Ltd on +44 20 7863 3079 or email


testhousedirectory@concordepublishing.com www.TestHouseDirectory.com


Air Monitoring Airborne particle counts Aseptic systems Clean room Clean room consultancy Clean room services Clean room validation Hepa filter integrity testing Monitoring


Test House Directory 2018 n 11


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84