FHS-AUG23-PG24_Layout 1 27/07/2023 10:55 Page 24
MOVING & LIFTING C
onveyor belts are an essential part of any recycling operation. There are three main types of conveyor belt materials that are commonly used in recycling applications: rubber, PVC, and
TPU. Each material has its own advantages and disadvantages, and the best material for a particular application will depend on a number of factors, including the type of materials being recycled, the speed of the conveyor belt, and the environmental impact of the material.
RUBBER BELTS Traditionally, rubber belts have been the first choice for use in recycling applications and are still widely used despite new materials becoming more readily available. Rubber belts have several key advantages, such as high mechanical strength, cut resistance, and abrasion resistance. These are particularly valuable for separating mixed waste, especially when materials like brick, concrete, glass, and steel are involved. However, rubber belts have a couple of major disadvantages, including that they are slow to run and extremely energy intensive compared to other options. This is mainly caused by the high thickness and weight of rubber belts compared to alternative materials. For example, typical running speeds for a 3 m wide rubber belt are between 1 m/s and 1.5 m/s, whereas other materials can achieve speeds between 4 m/s and 6 m/s. Because of their weight, larger pulleys are needed to drive rubber belts compared to similar sized belts made from lightweight materials.
PVC BELTS Lightweight materials, such as Polyvinyl Chloride (PVC), are becoming increasingly more popular for applications like eddy current separators or general conveyors. PVC products are much lighter than conventional rubber belts and do not require heavy construction of conveyor parts. They also consume less energy in operation. The lower energy required to operate the system and lighter conveyor build lowers a facility’s ongoing operational costs and reduces its carbon footprint, something that is becoming a growing priority for many businesses. While not as durable as rubber belts, PVC
belts are well suited to transport materials like plastic and paper where there is less mechanical strain put on the belt than when transporting materials like brick and concrete. However, PVC does not work well if exposed to sunlight and very low temperatures, below -10°C.
TPU BELTS Another alternative to rubber and PVC belts is Thermoplastic Polyurethane (TPU). Generally, TPU belts have the highest upfront costs out of the three materials, but a lower total cost of ownership. TPU belts are lightweight, roughly half the weight of similar sized rubber belts, facilitating
KEY CONSIDERATIONS WHEN SELECTING BELT MATERIAL IN RECYCLING
Recycling plants are a natural home for conveyor belts, with these being used to process, sort, and transport waste materials plantwide. However, with multiple different conveyor belt types available, it can sometimes be difficult for plant managers to know which type is best for the job. Here Marcin Grzeszek, manager industry segment recycling at conveyor belt manufacturer Habasit, discusses the pros and cons of the three main types of conveyor belt materials found in recycling plants.
faster, wider recycling lines. This results in TPU belts having lower ongoing energy and maintenance costs compared to rubber belts while having an increased throughput. However, TPU belts are not without their
downsides. TPU is not as resistant to extremely hot water as PVC. This means that TPU belts are not well suited for applications involving a hot wash, such as the trommel separation of PET plastics where they are used to remove excess debris or labeling.
CHOOSING THE RIGHT BELT The best way to choose the right conveyor belt material for your recycling operation is to consider the factors that are most important to
you. If you are looking for a strong, durable belt that can handle a variety of materials, then a rubber belt may be the best choice. If you are looking for a lightweight, energy-efficient belt, then a PVC or TPU belt may be a better option. No matter what material you choose, it is
important to make sure that the belt is properly installed and maintained. This will help to ensure that the belt lasts for many years and that it performs at its best. By engaging a knowledgeable conveyor partner, such as Habasit, recycling companies can rest assured that they are always using the most suitable material for the application.
Habasit International
www.habasit.com
24 JULY/AUGUST 2023 | FACTORY&HANDLINGSOLUTIONS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
