auTomaTIon & roboTIcs I


f the statistics on the uK’s robot population are anything to go by, there are still significant numbers of opportunities available


for robots, or as the focus seems to be at the moment, collaborative robots, to make a positive impact on productivity. of course, there are certain applications


where it makes sense for tasks to be performed manually, especially where very high levels of dexterity may be required. For more sophisticated applications, the best option is often found in a fully automated solution. collaborative robots or cobots, as they are more commonly known, are targeted at the middle ground, where the cobot performs the repetitive or physically difficult operations and the operator adds value with the higher level decision making tasks. When collaborative robots started to become widely available many perceived a new revolution in the world of robotics, where this technology would proliferate throughout manufacturing facilities, either working alongside humans or replacing them altogether as an affordable automation solution. The reality today is somewhat different says lee


Kerswell: “although we have seen a number of applications where collaborative robots are working alongside humans in a true coordinated way, our experience and that of our customers overall is that collaborative technology is playing a more significant role in other ways. The affordable nature of these types of robots, combined with their ease of use has opened up opportunities where they are being used as a cost effective alternative to a traditional industrial robot. also, the flexibility they have over more traditional linear technologies or pick and place systems, means that they can make a valuable contribution as part of an overall automated system.” much has been made of the ability of the


collaborative robot to work alongside humans without the need for safety guarding. however, consideration needs to be given to the way in which the collaborative robot will operate, and a risk assessment must be carried out before decisions on whether or not guarding is required can be made. generally, out of the box the robot itself is safe, but as soon as end effectors or other tooling is integrated safety issues can arise. anything sharp, heavy or hot on the robot wrist can be dangerous, even at low speeds so safe zones need to be configured to allow the robot and human to perform their separate tasks safely. however, once these issues have been addressed, cobots can be both a valuable and productive tool working in conjunction with humans across a wide range of applications. Just as the automotive sector was the first to


embrace traditional industrial robots, the oem’s and Tier 1 and Tier 2 suppliers have also been the early adopters of collaborative robot systems. applications where cobots are being used include polishing, glue application, assembly of components, screwdriving and much more. In some of these areas the robots are working independently, much in the same way as industrial robots, and in others they are


collaboraTIve roboTs


The InTegraTors PersPecTIve There is little doubt that collaborative robots are finding their way into a broad range of applications. However, the question is - how are these types of robots being used? Are the majority of them actually working in true collaboration and coordination with humans, or are they being used in other ways by replacing traditional industrial robots and dedicated automation? This article, Lee Kerswell – head of Business Development at Altec Engineering looks at collaborative robots from a system integrators perspective and discusses the ways in which Altec and their customers are using the technology.


operating in a true collaborative way. so, how do you decide whether to use a traditional industrial robot or a collaborative robot and how should the work cell be configured? Kerswell provides some insight: “For those new to automation and robotics it can sometimes be difficult to understand the best technical and most cost effective approach. as system integrators altec has experience with a broad range of automation technologies, including many different robot types, so we are able to offer impartial advice on the best solution for any given application. For example, it may be at the outset the customer believes that a collaborative robot(s) will be the solution to their project. however, depending upon the specifics


of the application, it may be that a collaborative version of an industrial robot from one of the major manufacturers, which will be faster and generally capable of higher payloads etc. may be the best option. It could also be the case that a completely different robot, such as a scara type may offer the optimum solution.” In summary, it is clear that collaborative


robots are here to stay and indeed it is likely that they will continue to open up greater numbers of opportunities for automation within a wide range of sectors. It is also the case however, that in many cases they will be competing for market share with their industrial robot cousins.


Altec Engineering www.alteceng.co.uk


18 July/augusT 2021 | FacTory&hanDlIngsoluTIons


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74