COMBINED HEAT & POWER FEATURE
REHAU SUPPLIES FUTURE DISTRICT HEATING NETWORK
The Regional Performance Centre (RPC) Dundee at Caird Park, Dundee, is a community hub that not only provides the community with sporting facilities, but also marks the beginning of a district heating revolution for the area
W
ith the UK Government announcing its 2050 net-zero emissions policy,
and the Scottish Government setting a 2045 net-zero target, contractors are increasingly required to prioritise sustainability when constructing new developments. It was clear the centre would need a heating system that could supply both itself and the surrounding buildings with hot water in an environmentally friendly manner. In this situation, a district heating
scheme represented an innovative solution. By using a district heating network to supply multiple homes, this development could eliminate the cost and environmental damage incurred through fossil fuel boilers in individual properties. It also demonstrates an alternative heating system for developers and local authorities to consider that adheres to the Future Homes Standard 2025, as well as the ‘net-zero’ targets.
DETERMINING THE HEAT REQUIREMENTS Following the selection of the technology by Dundee City Council for their project, the ESB appointed polymer plumbing solution specialist REHAU to supply the required pre-insulated district heating pipework, RAUTHERMEX, which was installed between the energy centre and the rest of the development. Now Scotland’s largest ground source
heat pump (GSHP) system, the development uses three GSHPs supplied with water from a series of 120 boreholes around 200m deep, circulating hot water from the on-site energy centre. Powered by a combined heat and power (CHP) unit, these heat pumps supply the main sports hub building and smaller athletics building through the RAUTHERMEX pipework, which is connected to a low- pressure hot water and domestic heat exchanger in each building. With the heating source and the type of
pipework determined, pipe sizes needed to be specified to ensure the immediate and future heating requirements of the development would be satisfied. REHAU and Dundee City Council entered into discussions surrounding the Regional
Pre-insulated polymer pipework is a
practical option for renewable district heating systems because it ensures minimal heat losses across the network and improves system efficiency. The lower flow temperature of the heat network is also well-suited to polymer piping as it allows for a lifespan of well over 50 years.
Performance Centre’s short- and long- term requirements to determine the suitable sizing of RAUTHERMEX pipework. “We had a dialogue with Dundee City
Council surrounding the total heat loads of the development,” said Kenny Boyle, Heat Networks Specialist at REHAU. “At that point, we could demonstrate that reducing the piping sizes would satisfy the design criteria and not incur any drops in pressure or velocity.”
FLEXIBILITY AND SPEED FROM POLYMER Due to the flexibility of its polymer material, excellent thermal performance afforded by the polyurethane rigid (PUR) foam and the speed at which connections can be made, ESB favoured the RAUTHERMEX pipework over other potential solutions. They appointed Pro- Weld to install the RAUTHERMEX pipework due to their high level of expertise and experience they have with this REHAU product. “Because RAUTHERMEX was so flexible,
we were able to bend the pipework slightly around sweeping corners, reducing the amount of elbow joints in the network and therefore the friction in the water flow,” said Gregor Ford, Project Manager at ESB. “The range of options and accessories available meant we were also able to adapt to anything that changed on site.” “We were very happy with how quick and
easy it was to install RAUTHERMEX,” says Allan Davidson of Pro-Weld. “We were able to install it directly into the trenches and make the connections and joints there and then on site. Thanks to the polymer pipework’s lighter weight, the installation process could be carried out more quickly and easily than a steel installation.”
CHANGING THE ROUTE The adaptability of the polymer pipework proved to be essential midway through the project. Upon discovery of a large steel water main that could not be diverted or removed, the contractor and installer both needed to change their plans for installation. Thanks to the flexibility of the polymer pipework, they were able to install the district heating pipes below the water main.
A NETWORK IN THE PIPELINE As sustainability becomes a growing priority in construction, the future of traditional heating systems is becoming increasingly uncertain. With that in mind, this project gives a good insight into a practical alternative solution to supplying our nation’s homes with hot water. Because of initiatives such as the net-zero policy targets and the Future Homes Standard 2025, the Dundee RPC represents a renewable, low-emissions source of energy for the community that provides a sustainable future heating supply for future developments in the area. So far, the scheme only supplies the
sports centre. However, the network has two termination points which mark the beginning of housing developments that will be part of this network. As pressure from the Government to reduce energy bills grows, centralised heating networks such as these are becoming a more viable option for providing environmentally friendly and sustainable heating for communities. Furthermore, by reducing the installation, operation and maintenance costs of individual boilers in homes, these communities can also enjoy lower-cost energy bills.
Rehau
rehau.uk/districtheating ENERGY MANAGEMENT | SUMMER 2020 19
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
