FEATURE Chemicals & Pharmaceuticals
New liquid dispenser to shake up lab automation
When you need the accuracy but don’t have the room or budget M
iniaturisation has existed for a while, but usually at a high cost to medical device manufacturers. When
Manchester-based UK Robotics, a specialist in building integrated lab automation solutions for the life sciences, needed to create a new cost- effective two valve nanolitre microplate reagent dispenser, it turned to precision DC motor manufacturer maxon UK and Ireland for help. Before lab automation, pipettes were used to
move liquid samples by hand into large testing tubes. The problem here was that large tubes required large volumes of liquid sample, limiting how many experiments could run at any given time. To increase sample throughput and overall productivity, biotech and pharmaceutic companies started using plastic microplates with small wells instead of test tubes. Microplates have more than 1,536 wells in a small 128mm by 85mm footprint. Volumes are often as low as a few hundredths of a nanolitre
18 September 2022 Irish Manufacturing
per well and must be dispensed accurately into each well. When the fl uid being dispensed can cost over £1,000 per millilitre, it is crucial to be able to use the smallest possible volume per experiment. Pipetting by hand is time-consuming, labour
intensive and human error could lead to inaccurate results or wasted assets. Therefore, UK Robotics created the D2 liquid dispenser, which has a lower price point and is 25 per cent smaller than other brands. These factors are hugely important for start-ups or companies with limited lab space and budgets, but still need to maintain accuracy when working with small dispense volumes. “The accuracy of lab automation devices is paramount to delivering reliable results. We appreciated there were cheaper motor manufacturers out there, but we needed the consistency and quality that maxon is known for,” explains Mike Counsell, Founder
of UK Robotics. “maxon’s motors are also more cost-effective and time-saving long term. For example, when you calibrate one of maxon’s motors, you know it will be the right calibration for the others. Lab managers no longer waste time and resources on calibrating every motor before every use.” For consistency, accuracy and a smooth
torque curve, the D2 uses two maxon brushless EC 60 fl at motors for the arms of the X and Y coordinates. Furthermore, one maxon EC 45 fl at motor with a MILE encoder is used for the Z axis. Up to 40 samples per second can be delivered through a high precision aperture of just 0.06mm. The valves utilise hard closing surfaces of polished sapphire and ruby, which allows for precision, repeatability and a degree of resistance to a range of chemicals.
Maxon
www.maxongroup.com
www.irish-manufacturing.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
