IC-SPR24-PG14_Layout 1 12/02/2024 11:59 Page 14
ATEX EQUIPMENT
HEALTH, SAFETY AND HEAT TRANSFER SYSTEMS
M
anufacturing facilities in a range of industries rely on heat transfer systems and thermal fluid to indirectly heat products. From foods to pharmaceuticals,
various applications require precise temperature control during the manufacturing process to enable desired reactions to occur. Heat transfer systems containing thermal fluid are safer than the alternative - steam- based systems - mostly because they do not need to be operated at high pressure to maintain a constant temperature. However, companies that use thermal fluid-based systems must proactively maintain them to reduce the risks associated with explosive atmospheres. DSEAR and UKEX (formerly ATEX) provide the overarching regulation that health and safety managers must comply with, what follows are some practices which will help ensure compliance.
MANAGED RISK Perhaps the most significant aspect of a heat transfer system is the one most easily overlooked. Once inside the system, heat transfer fluid is invisible, so a potentially hazardous issue could easily go unnoticed. For example, fluid degradation - caused over time by oxidation and thermal cracking - can lower a fluid’s flash point, which can increase the risk of fire.
As health and safety managers cannot see the fluid, understanding the outcome of regular sampling by engineers helps them determine the fluid’s condition over time and can inform decisions that can extend fluid lifespan. To provide a representative sample, heat transfer fluids must be sampled while the system is closed, hot and circulating. The sample can then be sent to a lab for
The Isle of Man is home to the world’s longest running electric tramcars. Installed in 1896 following the arrival of tourism to the area, updates and extensions to the track and its cars mean they are still safely carrying passengers today. A heat transfer fluid (HTF) system can have an impressively long life too, says Clive Jones, managing director of thermal fluid systems expert Global Heat Transfer, provided the system is carefully maintained and its health and safety risks are well managed.
expert analysis. Tests include total acid number (TAN) for carbon levels and a flashpoint test for volatile light ends (VLEs) produced during degradation. If parameters are suboptimal, it is possible to take remedial action, such as system optimisation, fluid dilution or installation of a light ends removal kit (LERK). By understanding fluid condition, health and safety managers can adapt procedures accordingly to reduce the risk of unplanned downtime caused by using degraded fluid.
SAFE SITE
Another key consideration is the management of the system itself, particularly preventing leaks. A leak might produce a fine mist of fluid, putting employees at risk. Flange guards can help mitigate the risks associated with mists of fluid in two ways. Firstly, by converting the mist into a visible drip of fluid, they reduce the risk of fire as the drip is less flammable. Secondly, dripping fluid is much more visible than a fine spray, which makes it easier for staff for identify leaks. In hard-to-reach areas, thermal imaging can be used to assess the condition of the system or reveal leaks that might be invisible to
14 SPRING 2024 | INDUSTRIAL COMPLIANCE
the naked eye. It can also reduce the risks of monitoring hot, running equipment because it is possible to monitor from a safe distance.
KNOWLEDGEABLE STAFF Providing specialist thermal fluid training, including system checks, thermal fluid maintenance, safe handling and storage practices, can ensure that employees are aware of compliance criteria. Workers should also know where to access spill kits and personal protective equipment (PPE) and who to call if their system goes down. Incorporating health and safety measures into a preventative maintenance program, such as Thermocare, helps ensure compliance with regulatory guidelines. Thermal fluid specialists can deliver comprehensive support, offering access to an extensive range of thermal fluids for immediate dispatch, as well as specialised training and essential documentation for safe operations. With regular monitoring and proactive maintenance, a heat transfer fluid can safely operate for many years, although maybe not quite as long the Isle of Man tramcars.
Global Heat Transfer
www.globalhtf.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
