ADVERTISEMENT FEATURE COVER STORY


Act now to avoid contravening new workplace exposure limits


3M™ Gas & Flame Detection is warning that any businesses or public services that do not comply with newly updated workplace/occupational exposure limits to chemical agents could potentially face stern consequences, including prosecution. August 2018 saw the deadline pass for compliance with the revised EU Directive 2017/164/EU. However, for any businesses that remain concerned, 3M™ is offering help to ensure the regulations are met


I


ndicative occupational exposure limit values (IOELV) are health-based, non-binding values,


derived from the most recent scientific data available, taking into account the availability of reliable measurement techniques. For any chemical agent for which an IOELV has been set at EU level, Member States are required to establish a national occupational exposure limit. In the UK, for example, EH40 Workplace exposure limits from the Health and Safety Executive (HSE) have been updated directly in line with EU Directive 2017/164/EU. In the latest version of EH40, which also became active in August 2018, new limits have been introduced for 31 substances. “The updated regulations set out the latest


IOELV limits, which have been established in relation to a reference period of eight hours – considering a time-weighted average – and referred to as long-term exposure limit values,” explains Neil Gwinnutt, UK & Ireland sales manager, 3M™ Personal Safety Division - Portable Gas Detection. “In addition, for certain chemical agents, shorter reference periods exist, in general 15 minutes [also time-weighted averages], referred to as short-term exposure limit values. In line with the ongoing desire to create safer workplaces, IOELV limits have inevitably tightened in the updated regulations, which means any business that believes it was working safely to previous limits, may now be exceeding them.” By way of example, consider carbon


monoxide (CO), which is an extremely common byproduct of many industrial processes such as


wastewater treatment, steelmaking, forging, chemical production, and oil and gas extraction. The eight-hour exposure limit for CO has been reduced from 30ppm to 20ppm, while the 15 minute exposure limit has been tightened from 200ppm to 100ppm. “The changes in CO limits also have an impact on


the working practices of fire brigades and heating engineers, for instance,” says Mr Gwinnutt. Another common gas, hydrogen cyanide


(HCN), which is found widely in the plastics manufacturing industry, has seen a new eight- hour exposure limit introduced at 0.9ppm, while its 15 minute exposure limit has been reduced from 10ppm to 4.5ppm. “New limits have also been introduced for ) and nitric oxide (NO),


nitrogen dioxide (NO2


which are commonplace in the rail industry due to the diesel produced by locomotives,” says Mr Gwinnutt. “As a result, rail companies need to ensure that any engineers working in maintenance depots or in tunnels are not exposed to levels beyond those stated.” The long-term effects on health resulting from


exposure to chemical agents are well documented. Any employers contravening the new exposure limits could not only be risking the health and safety of their team, but find themselves subject to prosecution. To help avoid this situation, 3M™ Gas & Flame Detection is urging any concerned employers to get in touch. The Application Engineering group at 3M™ Gas & Flame Detection offers complete end-to-end consulting, from design, through to equipment specification, installation recommendations, maintenance and service. 3M™ Gas & Flame Detection brings together


industry-leading products from Detcon, Simtronics, Oldham and GMI to provide customers with fixed-point and portable gas detectors and controllers with proven reputations for quality and reliability. The products satisfy most international certification standards, including ATEX, SIL (Safety Integrity Level), CSA, Marine, IECEx and others. For more information, contact the 3M™


Gas & Flame Detection team of experts: gasandflamedetection@mmm.com or visit the website gasdetection.3M.com


3M™ Gas & Flame Detection gasdetection.3M.com


6 WINTER 2018 | INDUSTRIAL COMPLIANCE / INDUSTRIALCOMPLIANCE


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32