search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
Health & safety


integrates LEDs, a photodiode, and an analog front end (AFE) in one small 3.8 mm × 5.0 mm × 0.9 mm package. The benefits include:


A reduced component count


Meets new and existing regulations for life safety due to a high signal-to-noise ratio (SNR) and wide dynamic range for lower signal measurement


Reduced nuisance alarms to ensure verified alerts (and avoid alarm disable) by having two color detection and high dynamic range


Low power dissipation to allow more devices on wired or wireless loops


Small size to enable placement of detectors in hard to reach places


The elimination of LED supply chain management requirements


Running on a standard SMT assembly process


The FuTure Regulatory changes have driven the trend for smaller, more accurate smoke detection systems. In addition to the regulatory changes, customers are demanding better aesthetics and a wider range of trickier deployment scenarios. Meeting this demand will require smaller form factors at lower power. Systems that use dual wavelength detection can reduce nuisance alarms, which is a requirement of the new test regulations. Systems with a higher SNR and high dynamic range also help here as well as in the better identification of smoke type. Optical technology enables a high dynamic range to help increase reliability, create a smaller form factor, and/or reduce power consumption. Because nuisance alarms like cooking or


steam are now eliminated, smoke detectors can be fitted in areas like kitchens and bathrooms in higher densities, with more physical devices present through buildings enabling larger networked systems. Therefore, lower power requirements will enable battery operation (longer lifetime) or more devices on a main’s loop. But at a system level, for wireless networks, the faster alert requirement means the need for low latency networks. Because of the life safety aspect of smoke detection, the physical system will continue to remain as a standalone unit. However, in the future, there may also be the need to incorporate smoke detection into other building control systems—for example, within evacuation or emergency lighting, where a smaller form factor will become increasingly important.


Analog Devices www.analog.com UKManufacturing January 2021


the back of lean, efficient supply chain operations. However, in the drive to deliver to people’s doorsteps, health and safety must never be overlooked or compromised. So, observing some simple tips will go a long way to protecting people and reducing accidents.


T


holisTic approach Adopting a holistic approach to risk mitigation has to be seen as good practice and a sensible first step. And this includes combining practical standards with safe behaviour as a part of an efficient workplace operation. The key part of managing risk starts with an assessment - the effective process of evaluating threats to health and safety from workplace hazards to eliminate or reduce the level of incidents/accidents.


sign oF The Times Consider the value of good signage around your workplace environment. It’s never too late to regularly review your requirements alongside existing safe distancing, hygiene and mask- wearing measures. A lack of information, or confusing advice, is not only a nuisance but also dangerous, so take proactive steps towards improvements. Evaluate your existing labels, hanging signs, safety markers, route directions, exit way-markers around the workplace and update or replace if necessary. Using communications boards and shadow boards, for example, is not only good practice but also good for business.


non-slip soluTions Check you have the correct anti-slip measures in place and that they are doing their job correctly. This should include the placement of low cost but effective anti-slip stair treads and tapes alongside floor mounted pedestrian direction indicators, including one-way walking for maximum Covid control and protection.


a wasTe oF Time! Waste left strewn around the place is unhygienic, unprofessional and extremely hazardous, so look to keep it under control through better management procedures. Proper waste management revolves around improved productivity, more recycling and increased safety compliance. Keeping things neat and tidy through solutions such as standard in-house bins through to end-of-aisle waste collection sacks, which save floor space by hanging onto racking systems, contributes towards an efficient workplace while helping to prevent fewer trip hazards.


STEPS TO BETTER WORKPLACE HEALTH AND SAFETY


Jim roberts, product manager at Beaverswood, says industrial manufacturers and warehouse employers must continue to ensure the safety of their workforce as they optimise productivity in the face of the on-going virus crisis


he UK economy continues to battle through difficult times, with suppliers striving to meet the national need off


show and Tell Keeping your workforce abreast of the latest news and information contributes hugely to improved worker wellbeing, morale and motivation. Also never over estimate the level of your workforce’s understanding and awareness of safety and related issues. Keep important information and documentation displayed and accessible via modular shadow boards and other visual aids. These solutions will provide greater visibility, uniformity and clarity of message for workforces often operating 24/7 shift patterns.


look up, look ouT… The importance of wearing protective face masks and face shields during these times of pandemic cannot be overstated. But consider boosting your protective equipment with hard hats fitted with integrated face shields. After all, it is a cost effective solution to wearing two types of protective equipment simultaneously. Your health and safety obligations also include checking the condition of ladders and steps. To enhance the process, attach asset tag markers to equipment alongside a checklist and a system to record inspection dates.


Brace For impacT The installation of exterior safety barriers in delivery yards and approach ways can pay dividends, helping to maintain awareness while offering a reassuring presence in an area where it is more than likely a moving vehicle will be present – it should encourage people to habitually check their surroundings. They can also help to reduce the severity of damage and cost to building infrastructures and vehicles in the event of a collision. A review of exterior systems, markers and guideposts may also be beneficial, ensuring they are in good working order. Check too that your speed reducing ramps are up to scratch or if traffic flow could be bolstered by the addition of high- visibility posts and chains.


one size does noT FiT all Finally, tailor your decision-making to meet your specific needs. The one-size fits all approach does not always work in an environment where the balance between achieving optimum productivity and people’s wellbeing is paramount. Consider your requirements in terms of quality, reliability and performance, and look at how your supplier can add value in facilitating your understanding of the role that visual communications solutions plays in securing a safer tomorrow. www.beaverswood.co.uk


41


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44