SEPARATION & SCREENING
CUTTING COSTS AND CORROSION I
Del Williams, technical writer for Acme Engineering Prod., discusses how strainers constructed of Fibre-Reinforced Plastic (FRP) are designed to resist corrosion at a fraction of the cost of special stainless steels similar steels.
ndustrial strainers are essential for screening out debris and large particulates to protect crucial
downstream equipment and processes in a myriad of applications. Strainers are used not only in the treatment of seawater and wastewater, but also to remove debris from process and cooling tower water. Applications can range from desalination, wastewater treatment, and irrigation to power generation and the production of food, pharmaceuticals, consumer and industrial products.
Although standard carbon steel construction is adequate for typical use, corrosive environments such as those involving seawater, erosive slurries, or aggressive chemicals can quickly corrode conventional equipment. This can lead to potential issues in safety, quality, and compliance as well as production downtime, requiring premature strainer component replacement.
A more economic alternative In many industries, duplex or super duplex stainless-steel construction is used to resist corrosion, but at considerable cost. Now, a wide range of industrial facilities are turning to a more economic, durable alternative. “Today, a much more cost-effective option is to utilise Fibre-Reinforced Plastic (FRP) strainers that are specifically designed to be resistant to corrosive environments at a fraction of the cost of duplex or super duplex stainless steels,” said Robert Presser, Vice President of Acme Engineering Prod., a manufacturer of industrial self-cleaning strainers.
FRP is a composite material made up of polymer supported with fibres for added strength. FRP is already widely utilised for applications such as the power plant piping used to carry seawater for once-through process cooling.
Within industrial markets, OEMs are now utilising FRP in various applications where superior corrosion resistance is required at lower cost. As an example, Acme offers the option of using exceptionally corrosion resistant FRP for external strainer construction, including the pressure vessel itself. The internal mechanism is still manufactured with super duplex or other
40 FEBRUARY 2025 | PROCESS & CONTROL
Due to the FRP’s strength, the material can also be used to build to ASME BPVC Section X standards, which establishes requirements for the fabrication of fibre-reinforced plastic pressure vessels. Acme has already utilised FRP for pressure vessel applications up to 300 PSI.
Industries can save approximately half the cost or more when the strainer’s intake vessels and piping are built with FRP, and only the internals are constructed with super duplex
minimal oversight desired. In the case of the OEM’s automatic scraper strainer, a motorised unit is designed to continually remove both very large and very small, suspended solids from seawater, wastewater, and process streams.
“Industries can save approximately half the cost or more when the strainer’s intake vessels and piping are built with FRP, and only the internals are constructed with super duplex,” said Presser.
To meet industrial requirements, Acme’s FRP division designs and manufactures various types of FRP, simplex, duplex, automatic scraper, and backflush filters. To help ensure compliance with specifications, the OEM provides detailed engineering, including 3D modeling of FRP piping, piping flexibility/general stress analysis, and piping layout/isometrics. In addition, the OEM provides complete skids with piping, valves, and instrumentation along with PLC control, as needed.
According to Presser, an automatic, self- cleaning, scraper strainer is often used with FRP construction when cost-effective corrosion resistance is necessary and
Resisting clogging and fouling Cleaning is accomplished by a spring-loaded blade and brush system, managed by a fully automatic control system. Four scraper brushes rotate at 8 RPM, resulting in a cleaning rate of 32 strokes per minute. The scraper brushes get into wedge-wire slots and dislodge resistant particulates and solids. This approach enables the scraper strainers to resist clogging and fouling when faced with large solids and high solids concentration. It ensures a complete cleaning and is very effective against organic matter “biofouling.”
Although industrial facilities have long employed industrial strainers constructed of special stainless steels to resist corrosion, utilising FRP can be just as effective at a much lower cost. When used with advanced, self-cleaning scraper strainers, downstream equipment and processes can be effectively protected for the long term without premature component replacement or excessive oversight.
Acme Engineering Prod.
acmeprod.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
