PC-MAR22-PG10.1_Layout 1 07/03/2022 13:51 Page 10


TRANSDUCERS, TRANSMITTERS & SENSORS


systems, ultimately reducing downtime and saving money”. Loss of process efficiency was the key issue at one of The Müller group’s subsidiaries where the frequent changes in yoghurt flavours produced around 6 to 8 kilograms of excess fruit concentrate which could not be used.


This led to additional costs for disposing unwanted ingredients and the extra time- consuming cleaning of the fruit containers. Karsten Noack, Senior Production expert explained: “We didn’t have the means of measuring the exact filling level of the containers and initially we thought we could calibrate the systems to suit the different fruit concentrates. However, with the constantly increasing changes in flavours this was not practical”. When it came to the more exotic flavours, the existing sensors were simply just not reliable enough and in the worst case scenario the sensor continued to run on an empty container causing nitrogen (used to push the fruit concentrate out of the container) to enter the pump. When this happened the systems were down for up to 15 minutes to enable production staff to solve


SENSOR OPTIMISES YOGHURT PRODUCTION


Processors in the food and beverage industry have to strike a fine balance between offering customers a variety and optimising efficiency. Baumer sensors have achieved this for a subsidiary of dairy product manufacturer Müller


ptimising production processes, reducing downtime and cutting costs is a constant challenge for all manufacturers, especially where there are trends for diverse product variations. The food and beverage industry is an example of where there are always demands on manufacturers to be innovative and be able to respond to customer demands for new flavours and variations. Consequently there is increased pressure on systems and the key components within them to be able to deliver what’s required. Sensors are an obvious example of devices which are becoming increasingly important in the latest automated process systems such as the PAD20 level sensors from BAUMER. The new generation of PAD20 sensors have been pivotal in improving efficiency with accurate and reliable detection of air and gas bubbles in ingredients at one of Europe’s most advanced dairy plants. This has been recognised with the PAD20 analysis sensors winning a Dairy Technology Award for Environment and Sustainability presented at Anuga Food Tech in Cologne last year.


O 10 MARCH 2022 | PROCESS & CONTROL


Dr Mathias Wiora, Technical Innovation Manager at the Theo Müller group of companies confirmed: “The days when we used to produce five or six core flavours for yoghurt are long gone, today we have to process up to 4 rotating seasonal types of fruit, plus up to 12 new flavours every year. Flexibility is also important as usually these flavours are only offered for a short period of time”. He added,” Whilst we are delighted to be able to offer our customers the variety of flavours they want, we have to balance this against optimising the efficiency of our process


the problem resulting in the loss of time it takes to make around 10,000 pots of yoghurt. Following an extensive search by senior production staff along with a collaboration of a system integrator and sensor manufacturer BAUMER, a solution was found. Precise timing for the container changes was the key issue and the latest PAD20 level sensors with its Air Trigger feature solved the problem. The sensor is installed on the fruit container inlet pipe and reliably recognises when the container is empty at the right moment – basically it performs the function of precise, reliable air detection during the crucial process of container changing. The sensor has the ability to measure air in all types of liquids regardless of whether liquids are pasty or viscous, reliably and fast. Thanks to this solution all fruit containers used in yoghurt production at Müller can be fully utilised because as soon as they are empty the sensor reacts so the system can be switched to the next container. In summary, PAD20S level sensors are an effective, robust solution for detecting air and gas bubbles in any liquid or viscous media such as fruit preparations, cooling agents (DC>1.5), particularly in harsh ambient conditions.


Switching outputs are individually adjustable with IO-Link (2) for definition of switching range, or two-stage alarms (early warning) and they provide optional multi- colour process visualisation through 360º of switching state.


Baumer www.baumer.com/gb/en/


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66