ADVERTORIALS ADVERTORIALS INTERFACE FORCEMEASUREMENTS
INDYSOFT SOFTWARE SOLUTION FOR CALIB ATRATIONMANAGEMENT,TOOLING AND PREVENTAT
T, ATIVEMAINTENANC E W The Problem
A customer came to us with a requirement to measure the torque setting of air drivers being used on an assembly line. They had been experiencing fasteners being damaged and suspected that incorrect torque settings were causing the issue. Testing had to be carried out on the assembly line, which had multiple workstations. A portable, yet robust and accurate test solution was required.
We were able to help The Solution
with the USB version of our T15, Hex Drive rotary torque transducer. IndyS ft Europe L
The T15 is a contactless design torque transducer, capable of up to 2,500 samples per second at 4,000RPM to an enhanced accuracy class of 0.1% full scale. The USB version advantages of being powered by the USB connection to a PC or l power is required.
laptop, so no externa offers the additional
In addition, the T15-USB is supplied with our BluDAQ, Windows compatible data logging software, enabling view live data viewing and automatic data logging. Data can also be exported in BMP or CSV file formats for further analysis in other software packages.
The T15 torque transducer could be installed quickly and eas ily between the air driver and fittings on each workstation. This enabled data to be collected, viewed and saved in just a few moments. Any adjustments to incorrectly setup air drivers could be made and checked without a lengthy shutdown of the production line. Saving time and money
The Range
Interface Force Measurements offers a range of torque transducers with USB output. All with the same advantages of the T15.
The complete range consists of T12 – Square Drive; T15 – Hex Drive and T25 – Shaft style. All in capacities from 0.1 to 5,000Nm and capable of measuring at speeds up to 30,000RPM.
All these sensors are also available with analog, ±5vdc outpu ts. BluDAQ Software
All our USB Torque Transducers are supplied with BluDAQ software from Interface Force Measurements, free of charge. BluDAQ is a fully-featured, Windows compatible data log- ging software package with
Torque, speed, and power OR torque = angle • Display, graph, and logging
• Up to 2,500 measurements per second • 16-bit resolution • Peak & valley • Unit conversion
• Triggered star t & stop for automatic event captur e • Automatic scaling of Y-Axis
• Log files are in Excel-compatible .csv format • Power supply over USB – no separate power cord • Configuration & calibration stored in the sensor
IndySoft Europe Ltd
+44 (0) 1908 904 116
www.IndySoft.com
A QUICK AND COST-EFFECTIVEWATER ACTIVITY ISOTHERMGENERATION SERVICE
AT AT
development teams in the food industry know that water activity is one of the most important characteristics, while water sorption isotherms provide
P
invaluable insights for food safety and quality. Whereas traditional techniques for generating
isotherms took weeks and were correspondingly expensive, newer and more cost- effective technology enables the time to be cut to a matter of days.
A cost-effective and quick solution is to use the isotherm generation service offered by Labcell. Full adsorption and desorption curves are generated for samples provided by the customer. Data is then returned in the form of a .csv file, together with the isotherms plotted on a graph. Only a small product sample is required and the customer is asked for a moisture content figure taken from the same sample. Turnaround is usually one week or less.
Labcell Labcell +44 (0)1420 568150
mechanical and MOSFET relay technology to provide the ultimate test switching solution
In a world first for
semiconductor and other test equipme Electronic Co
mponents nt, Omron
Europe has created a
MOSFET relay module that minimized leakage current.
With a unique T- T- circuit structure, the Omron G3VM-21MT offers an exceptionally low
leakage current of just 1pA (pico-Amp) or less, giving accurate measurements in all types of test equipment. Mechanical relays have previously been preferred in the semiconductor and other test equipment, in part due to their low leakage current.
In erfac Interface 01344 776666
interfaceforce.co.uk Omron Electronics Componen
Omron Electronics Components +31 235 681 296
62 62
www.components.omron.eu May 2020 Instrumentation Month May 2020 Instrumentation Monthlly
LEAKAGE FORMAXIMUMTEST ACCURACY T
OMRONMOSFET RELAY he G3VM-21MT combines
the advantages of
www.labcell.com AYMINIMISES roduct and packaging
e are all working from home and able to offer 'remote' training, support or supply of our industry standard Calibration Management, To
Tooling and
Preventative Maintenance Software. It's got some great features that
you'll need to up-date for. It's FREE if you have a valid support agreement or is included when you become a new customer!
Confused? We can offer IndySoft advice on everything from training to how-to's and help I think I've lost everything. Need additional licenses or want to get IndySoft working for you whilst it might be quieter?
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74
