• • • ENCLOSURES • • • Do’s and Dont’s on installing enclosures safely
Industry experts’ EnclosurePro have provided some expert tips below on installing electrical enclosures whether it be on a domestic or industry level. As well as the do’s and dont’s listed below there are three main core practices you can follow to make sure you install your enclosure to a good standard
1. CHECK THE IP RATING
Whether you are installing a large standing kiosk or a small wall enclosure the IP rating identifies the level of effectiveness against water ingress or other foreign bodies.
The rating starts from 0 (no protection) to 10 (optimum).
The second digit of the IP rating is most important which identifies the level of protection against moisture.
2. FULLY IMMERSE THE KIT
If you need a completely water-resistant enclosure then you might want to consider fully immersing the unit to sniff out any exposed areas. This can give you the oppertunity you to seal them if necessary.
3. CHECKING AND
MONITORING YOUR ENCLOSURE UNIT
It is also recommended to check your equipment’s performance by doing routine, documented checks by trained individuals. By doing this you can identify any minor faults or damage before they cause irreversible damage.
When installing your enclosure you should; •
When installing the enclosure make sure to instal far from reach of children and pets. •If a damaged cable were to be touching your metal enclosure it could be extremely dangerous. Therefore we recommend doing regular maintenance checks on all electrical equipment. Stay a minimum of 10 feet away from any powerlines if you are installing aunty on the outside of a building. •Install waterproof covers and GFCI outlets on all external units. •
To avoid your unit from being loose make
sure you are installing it against a suitable foundation. •Teach children warning sign meaning and to stay away from enclosures or any electrical equipment.
When installing your enclosure you shouldn’t; •Under no circumstance should a unit be installed near a body of water (such as a lake, river, stream etc). •Install an enclosure that isn’t suitable in size to save costs. You want to avoid over wiring where it would impede any works in the future •Allow untrained personnel access to the unit.
In short, electrical enclosures can be a safe and effective way to protect your electrical kit. By being aware of the different contaminants and factors you can execute the fitting of your equipment effectively while keeping individuals safe.
ENCLOSURE PRO |
enclosurepro.co.uk
Stocked non me Envirronmen
ed non-metallic i du onmental sea
Learn mor : ham
ales@hammfg.com • 0
m • 01256 8
l sealing up to I 6 812812
c industriall en g up to IP68
earn more:
hammfg.com/u uksal s@ham
enclosu esurres om/uk-ind
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
