PRODUCTS UPS & STANDBY POWER INCREASED EFFICIENCY FOR UPS
RSU promises to change the way factories maintain their power supply. When the mains power
CP Automation now distributes and fits the REVCON boost converter module RSU as part of its range. This unit enables highly efficient uninterruptable power supply of variable frequency drives (VFD). The compact power unit has huge cost saving implications for anyone that uses power loss ride through in their processes. UPS systems provide an
electrical supply that is converted from batteries when the mains supply is lost, in situations such as brown outs, unstable supplies, or emergency lift evacuations. The REVCON boost converter module
supply is down, the REVCON boost converter is activated and sets the voltage value from the batteries to the required level of the VFD. This maintains the power supply in the DC bus to the VFD, without any interruption. This simple principle
enables a highly efficient, yet inexpensive option for to VFD drives. While conventional UPS systems have an efficiency of 90 to 95 per cent, adding a REVCON boost converter means the UPS setup will have efficiency greater than 99.5 per cent. CP Automation is
available to supply and install the REVCON boost converter module RSU. For more information about CP Automation’s catalogue of REVCON products, visit the website below.
CP Automation
www.cpaltd.net
COMPACT DISTRIBUTION SOLUTION FOR MISSION CRITICAL POWER APPLICATIONS
ABB’s MNS integrates UPS and switchgear technologies into a single and compact system. It enables users to save up to 10 per cent capital in electrical infrastructure, requires up to 30 per cent less space and can be up and running as much as 20 per cent faster, due to reduced installation and commissioning time. MNS- Up allows switchgear and UPS modules to be safely and rapidly exchanged without disconnecting power. Responsible energy consumption is ensured through planned incremental additions. MNS-Up’s modular design expands in 100kW steps so that
companies just pay as they grow. Each frame of the system can support up to five 100kW UPS modules. Up to six frames can combine to provide 3MW of backup power supply. ABB can install
MNS-Up in a configuration that works best for the space available (L-shape, U-shape, straight lines or back-to-back) and all without external bus ducts or cables.
ABB
NEW LITHIUM-ION BATTERY SYSTEM
Saft introduces Flex’ion as its latest generation lithium-ion (Li-ion) product range. This advanced battery system is designed for high power UPS applications in mission critical facilities, such as data centres and oil and gas installations. Flex’ion offers reduced footprint, 20 years
calendar life, 10 times more cycle life and maintenance-free cells, as well as a reduced total cost of ownership (TCO) and close to 100 per cent charge-discharge efficiency, which reduces power consumption. Its design includes an intuitive HMI and a front panel visual indication of the battery’s condition.
NEW PANEL MOUNT POWER SUPPLIES WITH UPS DC VOLTAGE FOR SECURITY SYSTEMS
Luso announces the availability of Delta Electronics’ new family of AC/DC panel mount power supplies with integrated uninterruptible power supply (UPS) DC voltage, particularly suitable for security applications such as CCTV, alarm systems, access control and automatic doors, where operation is usually required at all times. The Delta PMU-155W, part of the PMU series, is
designed to operate with an external 12Vdc or 24Vdc SLA sealed lead acid battery. The integrated UPS DC voltage provides battery management for charging and has built-in monitoring signals for AC OK, DC
OK and a battery low status alert. The power supply utilises MOSFET to switch to battery operation, with zero switch-over time in the event of failure or disruption of the input AC power source. The first two models in the PMU series are rated at 13.8V/9.5A (PMU-13V155WCCA) and
27.6V/4A (PMU-27V155WCCA), with adjustable charging current from 0.5A to 1.5A. The convection-cooled power supply has a wide operating temperature range from -20˚C to +70˚C. The series also features protection against reverse polarity for battery connection to prevent accidental damage to the power supply. The PMU series of products are also available in L Frame platform for different application needs. The PMU series meets major international safety approvals, according to IEC/EN/UL 60950-1 and
CCC to GB4943.1, certified to EMI Class B to EN 55022, EN 55032 and GB 9254.1. There is protection against overvoltage, overcurrent, over temperature and short circuit. Luso Electronics recently signed a deal with Delta Electronics to become UK and Ireland
distributor for its range of high-efficiency and robust power supplies. In particular, Luso is focusing on selling Delta’s open frame and panel mount power supplies, suitable for industrial and factory automation applications and high-quality power supplies for healthcare and medical applications.
Luso 14 JUNE 2017 | ELECTRICAL ENGINEERING
www.lusoelectronics.com CE+T Power
www.cet-power.com/en The battery modules fit
standard 19-inch racks and are mounted in Saft designed cabinets, ensuring reduced floor space in battery rooms. Its modular design provides maximum system flexibility to adjust power, operating voltage and backup time. Furthermore, the solution is available either as a full system or as a kit of sub- components to be integrated with power electronic equipment.
www.saftbatteries.com
NEW, UPGRADED ECI
CE+T Power has announced the launch of new revolutionary functionality for its Enhanced Conversion Innovation (ECI) technology, including multi-source and multi-directional power conversion. The new ECI technology offers bi- directionality and multi-directionality on every converter, bringing a new dimension to modular inverters and uninterruptible power supplies (UPS) with enhanced flexibility and improved efficiency. With three high-efficiency (up to 96 per cent
for AC/AC and 94 per cent for DC/AC and AC/DC) energy converters, the upgraded ECI allows unlimited new energy conversion possibilities, such as peak shaving, phase-balancing, high- quality battery management and tests, and energy restitution to a micro-grid and/or a battery. ECI can perform energy management and peak shaving can also be managed by limiting the power taken from the AC input, and instead the extra power will be taken from the DC source and sent to the load.
www.abb.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64
