| Transmission & distribution
Structure of Amokabel covered conductor
Protection of bird life is an important consideration on the island of Öland
voltage. “For high voltages the insulation has to be really thick, and the cable manufacture entails a vertical extrusion, requiring you to build high towers.”
In contrast, for covered conductors installed overhead there is only a “slight” price difference between the 20 kV and 52 kV cable, he says. Overall, installation time for the 12 km Öland line was around seven weeks and the total project cost was around 4.7 million SEK.
Cable design
The Amokabel covered conductor employs three layers, Peter explains. The first is a semi conductive layer applied to the aluminium strands. This creates a more evenly distributed electrical field, reducing electrical stress on the insulation. The second layer consists of high-grade electrical insulation, while the third is a robust outer jacket tailor made to suit local conditions, eg high UV in Australia and the Middle East, low temperatures in Sweden. A USP of the Amokabel process is a “water blocking” step, so the cable is “100% water
tight from the beginning,” notes Peter. With other covered conductor designs water can find its way in and propagate quite a long way, even as far as the midspan. In cold conditions, such as those encountered in Sweden, “this water can freeze and potentially crack the insulation.” But this certainly won’t be happening in the Öland line.
E.ON views the Öland covered conductor project as a pilot and “we will see how it works”, says Björn Persson. “If, after one or two years of operation, we get good results, then of course there will be opportunities to carry out similar projects at other locations on the island and elsewhere in Sweden.”
Amokabel covered conductors worldwide: some recent developments
Looking at the adoption of covered conductors worldwide, the drivers, which vary from country to country, can include the following: distribution network outage reduction; bushfire prevention; wildlife protection; electrical safety (not least for line crews); avoidance of conductor corrosion, in particular for seaside sites; and, last but not least, the possibility of more compact installations because insulated lines allow phase-to-phase distances to be reduced. The technology is well established in Scandinavia, Amokabel’s “home turf”, particularly for power lines serving remote communities in heavily forested regions, with the aim of avoiding faults due to weather, trees falling and wild life (as in the Öland case). Among key potential markets is Australia, where the focus is on
reducing bushfire risks and improving grid reliability (see Modern Power Systems, July/August 2021, pp 11-12). Replacement of bare conductors in the country’s extensive SWER (single wire earth return) network represents a significant opportunity to eliminate bushfire risk in large parts of rural Australia at an extremely attractive cost, says Amokabel. In the past, Australian DNOs have tended to focus on pilot
projects, rather than full commercial roll-out of covered conductors. But the technology is now considered proven. Cost is perceived as a barrier for some projects, but Amokabel would argue that in many instances a rigorous cost benefit analysis has not been done. Recently, the company has been working on the provision of
covered conductor to the Neika area of Tasmania, which is known for vegetation related distribution system outages.
In New South Wales there is also currently a covered conductor project in full roll-out mode, albeit at relatively small scale. One factor working against adoption of covered conductors in the Australian state of Victoria has been the major investment that has occurred there in REFCL (Rapid Earth Fault Current Limiter) technology, but this has its limitations says Amokabel and is only applicable to three phase supply, and not to SWER. Looking to the longer term, in 2022 Amokabel acquired Euro-
Tech Cables as part of a plan for Australian production of covered conductor. Meanwhile, in India, very positive experience has been reported
by Karnataka Power Transmission Corp with 66 kV Amokabel covered conductor, including a right-of-way reduction from 18 m to 5 m in urban areas. Covered conductor has also been adopted in India along wildlife corridors, where, for example, elephants feed on leaves growing at a level similar to power lines. In the Middle East covered conductors are employed in coastal desert areas to address erosion/corrosion problems, eg arising from sand storms. The USA is proving very conservative and slow to adopt “new generation” covered conductor technology, with the power distribution industry working to standards that result in much heavier covered cable, making it difficult to use in reconductoring projects. But, potentially, it of course represents a very large market.
www.modernpowersystems.com | October 2024 | 33
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51
