ALL TERRAIN CRANES Ӏ SECTOR REPORT
15.2t, with each split into 10t
and 5.2t for mounting on the right and left of the base package. And, if necessary, the counterweight can be split into smaller pieces as well making it possible, for example, to pick up the 5.5-tonne base plate from a distance of up to 20.1m across the full radius.
Modern crane designs and
control systems allow for a range of safety and efficiency features. Surround View uses six crane cameras to show a computer- assisted diagram of maximum possible outrigger extensions. Peter Kleinhans, project manager for the new crane, says, “crane operators can take a look at a display in the cab to know exactly how they need to position the crane at their work site in order to extend all outriggers sufficiently and ensure that they are using the required counterweight tailswing radius. This eliminates tedious and time-consuming measurements and testing when looking for a location from which to operate the crane, making the latter ready for use faster.” The camera system also increases safety for other road
users, including pedestrians and cyclists, by giving operators a clear view around the vehicle. Since Bauma, the Tadano
designers have added more features to the crane. One is the TailGuard active backup assist system. This uses two ultrasonic sensors to monitor the area behind the crane when backing up and works regardless of ambient light conditions. It shows the distance from stationary and moving objects in the monitoring area on the cab’s monitor, plays an acoustic warning before reaching obstacles, and will stop the crane itself in the event that there is a risk of collision. The backup assist system is automatically activated the moment the crane’s reverse gear is engaged, making backing up significantly safer. Another feature will be added to
IC-1 Plus and a customisable counterweight configuration enable Tadano’s AC 5.250-2 to work as a taxi crane
the new models of the crane called Lift Adjuster. This can be switched on when needed, and monitors the deflection of the boom. The lift cylinder is then automatically adjusted, to compensate for changes in the hook radius. It seems the lifting industry is
witnessing an interesting evolution, characterised by manufacturers' continuous efforts to meet the diverse needs of their customers. The emergence of tailored solutions exemplifies this trend, offering enhanced capabilities and flexibility to tackle challenging lifting tasks. The collaboration between manufacturers, customers, and specialist engineers underscores the industry's commitment to innovation and customisation. Advancements in control
systems are enabling greater efficiency, safety, and environmental sustainability. These systems not only optimise crane performance but also provide valuable data for tracking fuel use and emissions, aligning with the industry's growing focus on sustainability and environmental responsibility. As the lifting industry continues
to evolve, driven by technological advancements and customer demand for tailored solutions, we can expect further innovations that enhance efficiency, safety, and sustainability across the sector.
46 CRANES TODAY
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69
