PROJECT OF THE MONTH | NEWS
a single-girder underslung crane, a chain hoist (a lifting device that moves heavy loads via a chain), as well as the appropriate control and motor technology. A key advantage of this kit is its flexibility, making it easy to adapt to the specific requirements of each application. Another benefit is the intuitive planning software, which allows crane systems to be configured efficiently with minimal planning effort. A single-girder underslung crane is a specialized crane system known for its compact design. Unlike conventional crane systems, the single-girder underslung crane is mounted directly to the ceiling of the hall, requiring no support pillars or wall attachments. This feature made the underslung crane from Stahl CraneSystems the ideal solution for the wastewater treatment plant, as it maximizes available space while ensuring sufficient lifting height for necessary maintenance tasks. The solution was tailored to the specific
requirements of the Feldkirch Wastewater Association. To achieve maximum lifting height in the limited overhead space, an electric trolley with an ultra-low headroom hoist was used. This special design reduces the crane’s overall height and allows a maximum lifting height (vertical movement range of the crane) of 3.5 meters despite the confined conditions. Additionally, a special form of brackets
for the crane runway was employed to make optimal use of the hall’s specific spatial conditions. The crane system, with its compact design, is ideal for the plant’s tight space constraints. The low construction height allows full utilization of the maximum possible lifting height. The single-girder underslung crane from
Stahl CraneSystems offers a lifting capacity of 4,000kg. The track gauge—the distance between the rails on which the crane runs—is 4.5 meters. The total length of the crane runway was set at 9 meters, ensuring flexibility for transporting loads within the facility.
The hoist motor type E42 for the STK5020-8/2 4/2-1 lifting device offers two lifting speeds: a slow speed of 1.00 m/min and a fast speed of 4.00 m/min. This flexibility allows both precise and rapid lifting operations, depending on the specific maintenance requirements. The travel speed of the ultra-low
headroom hoist, meaning the movement of the lifting device along the crane, ranges from 5 m/min in slow mode to 20 m/min in fast mode. For horizontal movement of the entire crane, there are also two travel speeds: a slow speed of 10 m/min and a fast speed of 40 m/min. For crane systems, Summer
Metalltechnik exclusively uses high-quality chain and wire rope hoists from partners such as Stahl CraneSystems.
The use of the CraneKit demonstrates how custom designs can become standard solutions when complemented by flexible planning and high-quality components. An example of this flexibility is the
option to retrofit the crane with additional components or functions if needed. This allows the crane system to be easily adapted to changing requirements without the need for a completely new installation. This forward-looking approach ensures that the crane will continue to meet operational demands in the years to come. Overall, the solution stands out for its
adaptability to spatial conditions and high performance. It not only enables more efficient maintenance of the dewatering systems but also significantly improves operational safety and efficiency.
www.hoistmagazine.com | January 2025 | 9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55
