RapidNet What is RapidNet?
RapidNet is HellermannTyton’s fully patented pre-terminated, pre-tested modular cabling system, eliminating the need for on-site terminations and reducing installation times significantly. All terminations are housed in the RapidNet cassette, ensuring complete protection and strain relief of the cables.
Why Choose RapidNet?
1. RapidNet provides choice and flexibility to the installer and end user by offering an extensive range of connectivity options in both fibre and copper formats, based on a common cassette delivering consistent performance, breadth of range and maximum flexibility.
2. Reduce installation times by up to 95%
3. Minimal on-site testing is required once installed because it’s pre-tested
Copper RapidNet
HellermannTyton’s RapidNet pre-terminated copper systems offer options and flexibility to any network cabling infrastructure project. Available in Category 6A, Category 6 and Category 5e, HellermannTyton are able to supply pre-terminated copper RapidNet in 12-port, 6-port and 4-port cassettes.
Cassette to Cassette The cassette to cassette pre-terminated system is available in 12-port, 6-port and 4-port variations. The cassette to cassette option is typically used in a data centreor comms room application where rack to rack or cabinet to cabinet connectivity is required. Using the 12-port cassette it is possible to use a split cassette option using two 6-port cassettes on the others end providing additional flexibility in the data cabinet.
Cassette to Bare End The cassette to bare end provides flexibility suring installation. This option is used in projects where space between rooms is limited or lengths are uncertain at the planning stage. The bare end can then be terminated on site to a range of outlets and panels available from HellermannTyton.
Cassette to Pod The cassette to pod option is available in 12-port, 6-port (Cat6 and Cat5e only) and 4 port variations. Each pod houses up to 6 RJ45 outlets and can snap into a floor box or used as a consolidation point beneath raised floors or in ceiling voids. In some applications it is possible to use a split-pod option provide more flexibility at the work area end.
Cassette to Keystone Jack The cassette to keystone jack is available in 6-port and 4-port options and gives the installer or end user added flexibility at the desk or ‘work area’ end. The keystone jack can be easily clipped into a selection of modules that can be fitted into floor boxes or wall mounted face plates.
Cassette to RJ45 Plug The cassette to RJ45 plug option is available in 12-port, 6-port (Cat6 and Cat5e only) and 4-port variations. This RapidNet option has been designed for cabinet to active equipment installations where the use of a full cross- connect solution reduces the risk of damage to the ports on expensive active equipment.
34
4. Manufactured at HellermannTyton’s purpose built facility in Northampton, UK
5. Can support high speed 10G networks and beyond
6. High port densities can be achieved using RapidNet fibre, with MTP connectors providing up to 144 fibres per cassette or up to 576 fibres in 1U of rack space
7. Less on-site cabling and packaging waste
Order by phone 01480 415000 | Glasgow 0141 456 1234 | Sunbury 0844 844 4444
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
