Modular Accessories ACTIVE PLATFORMS CONTINUED
AMF-LX Series Active Air Isolation Platforms
High performance anti-vibration platforms for balances and microscopes
Our accessories and options can be used with any of our range of tables and platforms over 60x60cm to improve the environment for your instruments as well as making your work easier.
Frame: Frames bolt directly to the platforms and are feature a hard grey epoxy powder finish. They are supplied with four leveling feet, giving 3cm of adjustment to ensure the frames stability on the most uneven floors. Frame height 71cm, going to a working height of 78cm.
Frame Shelf: Made from 2cm laminated board and are suitable for supporting equipment such as computers
Platform Guard: The platform guard is a sturdy rail (with side rail option) that fully surrounds the platform and protects it against acciden- tal knocks, which would otherwise disturb instruments on the platform
Platform Shelf: A 30cm wide shelf, which sits on the guard rail over the platform and is quick and easy to remove and replace.
n Performance vibration isolation active air isolation platforms for microbalances in sizes 45x50 and 60x60cm
n Unique air damped rolling diaphragm sub 2Hz frequency isolator removes up to 99 percent of vibrations
n Surface pharma grade stain silicon stainless with Ra of 0.25 microns
n Stainless steel version meets stringent cleanliness requirements and is resistant to almost all forms of chemical attack
n Sound deadened table construction eliminates unwanted surface vibrations
Our range of active air balance isolation platforms is large enough to support most of the larger microbalances . The air isolation platform effectively removes most vibrations while combining excellent stability. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz well below the frequencies at which typical building vibrations begin to occur. The pharma stainless work surfaces have an Ra of 0.25 micron suitable for the highest levels of clean rooms. A wide range of option includes: tables with guard rails,monitor arms , castors, stainless surface and silent air compressors. A 316 stainless version is available for Class 3 applications.
Specifications
Platform Working Height (mm) 60 Load Capacity
Level Adjustment (mm) Surfaces
Isolators
Isolation Performance 50Hz
100Hz
Natural Frequency Air Supply
Working Temperature
Ordering Information Cat # 6235 6240
Mfr.’s Code
AMF-40x50-LX AMF-60x60-LX
100kgs +/-3mm
Pharma stainless steel Ra 0.25 micron
4off damped
rolling diaphragm, active air self-levelling
97 percent 99 percent 2Hz
5 bar (max 7)
via 6mm push-fitting -20˚C to +160˚C
Description 40x50 60x60
Qty.
each each
Retractable Castors: These castors incorporate a foot, which can be raised and lowered using a thumbwheel, allowing the worksta- tion to be wheeled around and then securely mounted to the floor in a new location.
Monitor Stand: Supports monitors weighing up to 30kg. It fea- tures 360 degree rotation of the arm as well as height adjustment. It mounts to the platform guard.
Flat Screen Monitor Arm: The LCD monitor post bolts to the back guard at position of either the right or left support bar. It has an adjustable multi directional arm that allows the user to place the screen at the height and position most comfortable for use. It will support most standard monitor brackets. They also bolt directly to the AMT table tops (version shown)
Keyboard Shelf: Attaches to the base of the platform and is pulled out as required. It measures 50x35cm (WxD) and will accommo- date most keyboards
Platform Guard with Arm Rest Bar and Gel Rest on AMF-120x75 table
Silent Compressor: These compact and oil free air compres- sors are virtually silent (30dB/A) versions and suitable for running sever- al platforms.
Air Preparation Unit: An air preparation unit should be used if compressed air is used which may be damp or contain small particles. The unit will ensure the air supply is properly cleaned and dry before entering the platforms.
Mini Compressor: With noise levels of less than 47dB and almost no vibration, this is the best compressor for use with vibration isolation tables. The rings ensure the air is clean and pure and each compressor is fitted with a 10 bar regulator and 5 micron filter as standard. The air output is 6mm push fitting standard or 1/8 BSP if preferred. Models include: UK ver- sion 240Vac, European 220Vac version and USA 115 Vac version. Mfr.’s
Mfr.’s
Cat No. Code Description 6500
6510 6520
6530 6540
6550 6560
6570
F02 F03
F04 F05
F06 Qty.
F01 Medium Frame for Platform Frame Shelf
Active Platform Guards
Platform Shelf
Monitor Stand (needs guard)
Retractable Castor Feet
F08 Arm Rest Bar F10
Flat Screen Monitor Arm
each each
each each
each each
each each
Cat No. Code Description F13
6525 6580
6590 6600
6581-KS F17 6581-TD F19 F27
F28 Qty.
Passive Platform Guards
F15 Gel Arm Rest Keyboard Shelf Table Drawer Active Area
Plate (40x50cm)
Active Isolation Area Top Plate
each each each each
each each
6610 C01 Silent Compressor each 6620 C02 Air Preparation Unit each 6630 C03 Mini Compressor
5 each
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16