Graphene & Graphene Oxide Support Films for TEM n Graphene on Lacey Carbon 300 Mesh Copper TEM Grids
Graphene TEM support films are supported by a lacey carbon film on a 300 mesh copper TEM grid.
CAS No. 7782-42-5 Characteristics
1. Four thicknesses of CVD graphene Available in either 1, 2, 3-5 or 6-8 layers
2. TEM Substrate Lacey carbon support film on 300 mesh copper TEM grid
3. Graphene coverage of the TEM grid is better than 75% Appearance
The graphene film appears as a near-transparent to light-grey film on the surface of the Lacey Carbon mesh on a red-brown colored copper TEM grid.
Specifications Type
1 Layer 2 Layers
3-5 Layers 6-8 Layers
Thickness of the Graphene ~0.35 nm
~0.7 nm
1.0-1.7 nm 2.1-2.8 nm
Ordering Information Cat. No.
1 Layer
1GLC300Cu-5 1GLC300Cu-10 1GLC300Cu-25
2 Layers 2GLC300Cu-5 2GLC300Cu-10 2GLC300Cu-25
3-5 Layers 3GLC300Cu-5 3GLC300Cu-10 3GLC300Cu-25
6-8 Layers 6GLC300Cu-5 6GLC300Cu-10 6GLC300Cu-25
6
Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu
Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu
Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu
Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu Graphene on Lacey Carbon, 300 Cu
5/pk
10/pk 25/pk
5/pk
10/pk 25/pk
5/pk
10/pk 25/pk
5/pk
10/pk 25/pk
Electron Microscopy Sciences In PA: (215) 412-8400 • Toll-Free (800) 523-5874 Fax (215) 412-8450 or 8452 • email:
sgkcck@aol.com or
stacie@ems-secure.com •
www.emsdiasum.com
TEM Grid/
Transparency ~96.4%
~92.7%
~85.8-90.4% ~78.5-83.2%
AFM Substrate 300 Mesh
Copper Grid 300 Mesh
Copper Grid 300 Mesh
Copper Grid 300 Mesh
Copper Grid
Low magnification TEM image of single-layer graphene on lacey carbon film. Typical grain size is in the region of 2-3 µm
Support Film N/A
N/A N/A N/A
Description
Qty.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12
