How to Use... IMPORTANT:


Liquid Sample Holder Combined with microfluidics and high-precision pogo pin featuring leak-free sealing design, the


liquid sample holder is capable of controlling and monitoring the micro-environment. The microfluidics designs were optimized by Computational Fluid Dynamics (CFD) simulations to achieve the best transportation model for the samples. The liquid sample holder has special mechanical design to boost the operation efficiency and can finish the sample loading within a minute. The electrical charging/discharging can also be transmitted to the control system and inside the microfluidics via pogo pin design. Additionally, the heat exchange fluid can be circulated in one of the flow channels, thereby accomplishing the functions of temperature control and fluid properties monitoring, allowing nano-scale in-situ testing of the samples under their original activity.


Aquarius is the pioneer of using e-beam to test original fluids and liquid samples. Aquarius can test and monitor coating materials in their original form, especially the liquid state.


Performance Dry


Wet Open up starter kit. 3 Aggregation after dry-out Liquid sample in original state


Example from Polystyrene Manufacturing “In-situ” observation can include: Size/Size distribution, Aggregation, Shape, and Composition


Take out chip with tweezers.


5


Put chip onto center of holder and align the chip with tangent line.


6


Take out acrylic case equipped with holder.


4


1. Please don’t blow on the Microscopic Fluid Chip. 2. Do not drop the Microscopic Fluid Chip. 3. Drop liquid sample below 5uL


1


2


Take out pipette and install tip.


Well produced Polystyrene manufacturing process 8 Histogram of Tv31-1 Feret Mean


Draw up liquid sample onto the center of the chip (5uL at a time).


7


Incorrect Polystyrene manufacturing process (Polystyrene can’t form a sphere)


Ordering Information Cat. No.


Description


FV-102 FV-103 FV-104 FV-105


FlowView Starter Kit


Supplementary Pack (1 set) Supplementary Pack (5 set) Supplementary Pack (10 set)


Qty. kit


each each each


Assemble adapter. Finished!


Twist acrylic case to fit holder. Make sure upper and lower lines align.


9


Cover holder with lid and twist slightly.


10


Page 1  |  Page 2  |  Page 3  |  Page 4