Infection prevention
Why sterile barrier identification matters
In this article, Hanna-Kaisa Kyyrönen, Committee Manager, at Sterile Barrier Association provides an insight into why sterile barrier identification is an important aspect of infection prevention in theatres. So, what do theatre teams need to know to avoid confusion and ultimately protect their patients?
Sterile barrier systems (SBS) are a fundamental part of patient safety. They help protect medical devices from contamination throughout sterilisation, transport, storage and handling, and they support aseptic presentation at the point of use. In practice, however, healthcare staff may encounter several different SBS configurations, some of which can look similar to protective packaging. Clear identification therefore matters. Standardised SBS symbols help staff recognise the packaging configuration in front of them, apply the correct opening technique, and reduce the risk of accidental contamination of the device, the sterile field, and ultimately the patient. Healthcare-associated infections (HCAIs) continue to be a major public health problem, presenting a significant risk to patients in healthcare facilities, and putting a substantial and unnecessary burden on healthcare systems. According to the European Centre for Disease Prevention and Control (ECDC), it is estimated that more than 4.3 million people are infected with HCAIs in the EU alone each year.1
This is
particularly concerning because a significant percentage of HCAIs are caused by antimicrobial resistant (AMR) pathogens, which poses grave additional risks to patients – who already require hospital care – and further complicates their treatment. The WHO has reported that approximately one in six laboratory-confirmed bacterial infections worldwide were caused by bacteria resistant to antibiotics in 2023,2
and
that up to 30% of patients in intensive care can be affected by HCAIs.3 On the other hand, it is thought that most
HCAIs are preventable and could be reduced by between 35-70% through effective Infection Prevention and Control (IPC) measures.4,5,6
IPC
measures include hand hygiene, use of personal protective equipment (PPE), environmental cleaning, decontamination of medical devices and patient care equipment, triage of infectious patients, healthcare waste management, injection safety, and aseptic techniques.
Fig 1. The sterile packaging around a medical device can include more than one layer of SBS, as well as a layer of protective packaging inside or outside the SBS.
IPC measures also include the use of SBS to maintain the sterility of medical devices.
Protecting medical devices through the value chain Sterile Barrier System is an essential part of a sterile medical device. SBS refers to minimum packaging that prevents contamination and allows to sterilise the medical device. Until the point of use, the role of the SBS is to ensure that the medical device inside is kept sterile at all points in the healthcare value chain. The journey of an SBS starts when a medical
device is packed and the medical packaging sealed. The SBS and the device inside are then sterilised using the appropriate sterilisation modality. The SBS materials must be selected to ensure compatibility with the sterilisation method and achieve the desired microbial inactivation.
After sterilisation, the journey through the
value chain continues. For new devices, this includes transport from the manufacturer to the healthcare facility, delivery to the storeroom and eventual delivery to the point of use. For example, an operating theatre. For reusable medical devices, the value chain includes reprocessing, repackaging and sterilisation in SBS in a CSSD, delivery to the store room and, again, eventual delivery to the point of use. At each stage, there is the possibility that
the outer packaging becomes contaminated. Assuming that the SBS has been transported, stored and delivered properly, the last step in the journey is perhaps the most critical – aseptic presentation. Sterile packaging is worthless if it is opened incorrectly or carelessly. For this reason, it is essential that staff can correctly identify the type of SBS they are
November 2026 I
www.clinicalservicesjournal.com 63
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71