MELT FILTRATION | PROCESSING
Melt filter and screenchanger producers are
upgrading designs to handle the higher levels of contaminants
in recycled
plastics.Peter Mapleston reports on the latest developments
Innovations in melt filtration
Suppliers of melt filtration equipment are making steady progress in the development of innovative and more effective solutions for cleaning up industrial and post-consumer plastic melt streams containing levels of contamination all the way to very high. And several of the very latest developments first saw the light of day at two major recent international trade shows – NPE in the US in May and Plast in Italy in May/June). At Plast, for example, FIMIC displayed its ERAmelt filtration system. This filters material twice using meshes of two different sizes enabling it to handle highly contaminated, typically post-con- sumer, waste plastic. In a typical installation, the first mesh might be 400 micron and the second one 150 micron. Sales Director Erica Canaia explains that with laser-perforated filters being so expensive, the holes in the first filter are typically punched out and only the second filter is laser- perforated. The system is said to provide an interesting and cost-effective alternative to the use of two extruders, each equipped with its own single filter. The Italian company has just installed two of these systems at a customer in Canada. FIMIC is also placing a lot of emphasis on PVC
recycling, especially from cable scrap, and in this sector has been cooperating with researchers from Zlin University in the Czech Republic. Together with a customer, the team has tested a modified version of FIMIC’s RAS melt filter, using two different filtration levels of 600 micron and later 300 micron; future tests will use finer filters, down to 200
www.pipeandprofile.com January/February 2019 | PIPE & PROFILE EXTRUSION 35
micron. FIMIC Technician Marco Napoleone says the results to date have been “excellent.”
Heavy Duties Cofit had its new Gorillabelt T automatic and continuous screen changer on display at the Italian show. This is also intended for heavy recycling duties and offers filtration levels to 50 micron and features what the company describes as a zero polymer loss cleaning cycle. Cofit says the T version can handle a wide variety of waste plastics – it highlights building and agricultural film waste in particular, as well as post-consumer materials – containing any type of scrap (metal, wood, paper, textile fibre, sand, and more). The Gorillabelt T can operate at temperatures up to 300 °C and pressures of up to 300 bar, with
Main image: A common configuration for Nordson’s new screen packs is a four-layer arrangement
Left: A PVC filtration test using an RAS melt filter in the FIMIC plant in Italy
PHOTO: FIMIC
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54
