EXHIBITION PREVIEW | CHINAPLAS 2019
Feddem will present its LFT-PT line, developed with sister company Akro-Plastic
CPIC (Chonqing Polycomp International Corp) will exhibit its thermally resistant ECS303HR chopped strand glass fibre, which has been developed for PBT applications. The product is said to be highly reactive to create a good interfacial bond between the fibre and resin. After aging in 120˚C hot water, ECS303HR is said to retain 20% higher strength than competitor grades. �
www.cpicfiber.com
Croda will launch new permanent static dissipative polymers and amine-free anti-static additives for demanding applications such as automotive and electronics. The company’s Ionphase inherently dissipative polymers provide an immediate and permanent conductive effect that is not dependent on humidity. They provide a uniform and homog- enous distribution in the host polymer and offer excellent processability and surface quality. Multiple grades are available to suit different polymer types, including polyolefins, styrenics and PC blends. The company will also show its Atmer 511 long-term amine-free additive, which is suitable for use in applications where amine-containing additives are restricted. Intended for use in PP, the new grade complements the established range of Atmer migrating short and medium-term additives and externally coated additives for static protection. �
www.croda.com
Feddem’s main focus will be its LFT-PT Extrusion line, which is designed to provide a state-of-the-art system for production of long-fibre-reinforced pellets (typical lengths from 8 to 25 mm). The LFT-PT line technology is based on Feddem’s ICX Technology and is a joint development with sister company Akro-Plastic, which manufactures master- batch, compounds and LFTs.
Specially developed FME mixing elements
replace conventional kneading blocks, which avoids temperature peaks during mixing and allows for a gentler treatment of the product during the com- pounding process. FME mixing elements also require less energy for mixing than kneading blocks (a 10% energy saving in the mixing zone is claimed). �
www.feddem.com
HPF The Mineral Engineers, part of Quwarzwerke, will be displaying its high-performance fillers, which are based on naturally occurring and synthetic minerals such as quartz, wollastonite, kaolin or mica. The product line includes the Silatherm family of fillers developed to increase thermal conductivity of plastics. Optimised particle sizes and specially developed surface coatings enable high filling levels to be used without sacrificing processing or mechanical properties. The company will also present its Kaolin TEC 110 phyllosilicate. This features an extremely-hex- agonal quality offering very good reinforcing properties. As kaolin releases crystal water on heating it is also claimed to support the effective- ness of flame retardants. �
www.quarzwerke.com
�
Discover our wide range of
NEW GRANULATES
• easy dosing/dispersion • ideal for compounding • improved tribology • increased wear resistance • extra sizing: better adhesion to the matrix • increased mechanical reinforcement
sustainable technical fibres PARA-ARAMID:
NEW GRANULATES
• easy dosing/dispersion • dust free • improved tribology • increased conductivity • increased mechanical reinforcement
CARBON:
OTHER CARBON PRODUCTS:
Milled Carbon
Cut Carbon (0.2-120mm)
OUR PRODUCTS ARE PREFERRED BECAUSE OF THE EXCELLENT PRICE PERFORMANCE RATIO -
d.henau@procotex.com -
www.procotex.com
d.henau@procotex.com
Oversized and chopped
PHOTO: FEDDEM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
