MELT FILTRATION | TECHNOLOGY
Suppliers of melt filtration systems are improving their technologies to ensure efficient removal of contaminants even at finer levels. By Chris Saunders
Melt filtration moves in new directions
The growth of plastics recycling for post-consumer packaging and its expansion into areas such as fibre production makes quality a top priority for new melt filtration technology. Rising to the quality challenge, suppliers are developing systems that also provide recyclers with greater automation, increased throughput and improved control. “Since the early days of plastic recycling, melt
filtration has been a crucial part of the process,” said Matthias Schmitz, Head of Engineering Recycling Technology at BB Engineering (BBE). “State of the art for decades were screenchangers and laser filters in different executions. With an increasing demand for high quality applications like melt spinning, the requirement for finer filtration is gaining importance. Filter ratings of 20 µm or finer are in operation.” Building its reputation as a supplier to large spinning and film lines, BBE, based in Remscheid, Germany, has grown its capabilities in rPET fine filtration. It says its non-stop filtration equipment can easily be retrofitted either into existing recy- cling lines or directly into spinning lines to make them rPET-ready. The company said an interrup- tion-free process is guaranteed by an easy switch-
www.compoundingworld.com
over between congested and clean filter inserts, while its know-how and ongoing innovation result in the latest generation of candle-type filters, which are specially designed for the demands of recycled polymers.
Over 400 BBE installations are currently running
around the world. The continuous filtration is available with 1.8 to 40 m² of filtration area, resulting in very low flux rates, defined as through- put per area. These are necessary to extract the finest particles down to 15 µm as well as gels or accumulations. The produced melt achieves the lowest filter pressure values, which in turn increases the performance and feasibility of subsequent processes. One of the latest innovations used by BBE is known as White Filter Cleaning (WFC), a pre-clean- ing system for filter media and filter housings that does not use hazardous or harmful chemicals such as TEG. Instead, superheated steam is used to effectively remove residues on the filter media via hydrolysis. This treatment is not only environmen- tally friendly, but also improves filtration perfor- mance and extends the life of the filter media. “With WFC, BBE is offering an ecological
June 2024 | COMPOUNDING WORLD 49
Main image: Break Machin- ery’s Duo self-cleaning double filter system
IMAGE: BREAK MACHINERY
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56