Product News ENTEK Introduces the HT72 Twin-Screw Extruder
New Patent-Pending Vent Flow Sensor
ENTEK is proud to introduce its newest co-rotating twin-screw extruder, the HT72. HT stands for ‘High Torque’ and this new machine provides just that – in fact, it delivers the highest free volume at 18 torque density in the industry!
In addition to its robust construction, the HT72 is coupled with a larger motor size to be a true workhorse for continuous 24/7/365 production. The HT72 is the first in what will be a new series of twin-screw extruders from ENTEK.
The HT72 is designed for the commodity compounding and masterbatch industry, where customers require medium-to-large batch production sizes and high production rates are especially important. When coupled with ENTEK’s new patented Vacuum Feed Technology (VFT), the HT72 can drive throughputs even higher for processes which involve feeding low density fillers. This new machine will be welcomed by compounders looking for maximum uptime, high production rates, and readily available Overall Equipment Efficiency (OEE) data, both at the machine and via remote monitoring and access from mobile devices.
“We are excited to be launching this new twin-screw extruder to the
EXTRUSION SOLUTIONS is an ENTEK publication. Visit us at
www.entek.com JULY 2021 PAGE 3
compounding market,” said Linda Campbell, ENTEK VP of Sales. “It represents almost three years of research and development, to produce a completely new machine that provides industry-best performance.
When you combine the industry-best performance and technology of this machine with the outstanding customer service and support that ENTEK is known for, we believe we are adding value for our customers.”
• Mistake-proof screw elements and shafts
/Di
• Dashboard for quick health stats (OEE)
• Low decibel water cooled motor • Real time vibration monitoring • Real time oil quality monitoring • Easy access offboard cooling system • Full stainless-steel shroud for easy cleaning
• Insulation blankets to retain heat • Point of use tools • Quarter turn, standardized retained fasteners
• Hinged guards for quick access
Features of the new HT72 are numerous, but the following lists some of the machine’s key specifications: • 18 Nm/cm3 torque density • 1.61 Do
Watch our short video featuring Ryley Jones,
ENTEK’s Mechanical Engineering Supervisor and HT72 Project Lead, discussing the features and benefits of our newest twin-screw extruder!
https://vimeo.com/channels/ entek/559218752
An important new feature of the HT72 is a new, patent-pending Vent Flow Sensor. If the sensor detects a potential problem with vent flow, operators will have the time to correct any processing issues before they become problematic. This device will effectively reduce unplanned downtime and help reduce safety issues including the risk of fire. It will also make vent flow cleaning easier.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
