IN ACTION
Figure 1
1. Heading vector 2. COG vector 3. The time set for a heading vector
1 2 3
“Most electronic chart systems aren’t able to make a judgement – that’s for the humans using the equipment”
COG vector COG vectors use COG and Speed Over Ground (SOG) to project the motion of the vessel over the Earth’s surface. This means that COG vectors are considered as ground- stabilised, as they use speed and direction over the ground. Both SOG and COG are derived from a Global Navigation Satellite System (GNSS) receiver and show the vessel’s movement after any effect of wind and/or current. In figure 1, the vector is set for 12 minutes, suggesting the vessel will have moved to where the green arrow is pointing. COG vectors change length and direction when heading, speed, tidal streams or wind changes.
The art of judgement Although there are self-driving cars and ships, most electronic chart
40
rya.org.uk AUTUMN 2024
systems (ECS) can only present the data they access and don’t have the ability to make a judgement. The human using the equipment still needs to be in charge and make the decisions.
The example screen shows a black dotted line denoting the Bearing to Waypoint (BTW), which is 106°T. The navigator must match the COG vector with the dotted line or, to put it another way, point the COG vector at the waypoint. This would require an alteration to port. It can be estimated as 10° based on the difference between the COG value at the top of the screen and the BTW value at the bottom of the screen. The course to steer can be fine- tuned from the first estimate. Not all ECSs will be installed with a heading sensor and water speed input to enable a heading vector. The good news is that the
COG vector will work for monitoring progress with just a GNSS input. Without a heading sensor, the ECS will not be able to stabilise a radar display to an accurate North or course up, although it would get an approximate North by using the COG as an approximate heading, but only when the vessel is moving. The error would be greater in slow-moving vessels in strong tidal streams and strong winds.
Above: The GNSS system tracks the movement of the GNSS receiver over the Earth’s surface.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76