SAFETY IN THE PLANT
The KUB clean can be installed inside the existing tri-clamp pipe connections instead of the existing seals
R NEXT-GEN I
n processing plants that require the highest levels of hygiene, sterility and leak-tightness, excessive overpressure or vacuum can occur due to a wide variety of causes. In such cases, rupture discs protect both vessels and pipelines from deformation and further damage. Above all, they protect the lives of the employees who work in these plants. Te primary goal here is to provide optimum protection for these systems, considering technical and economic aspects, while at the same time minimising system downtime. Excessive overpressure can occur in almost all production areas and processes in the pharmaceutical industry. If the pressure exceeds or falls below the limits defined for the process, serious damage can occur to the respective plant components. Possible consequences include production stoppages and significant economic damage. Terefore, in situations where the pressure exceeds or undershoots the permissible operating range, a reliable and fast-acting pressure-relief device is essential. Many operators in the pharmaceutical
industry already use Rembe high- performance rupture discs in their processing plants – because the advantages of these pressure-relief devices ensure permanently safe operation. Tanks to their leak- tightness, these rupture discs prevent the
44
www.engineerlive.com
UPTURE DISCS
Hygienic design delivers sterility, leak-tightness and easy installation, explains Stefan Rüsenberg
escape of process media. Te complete cross-sectional release of the burst element provides immediate pressure relief for the system. Finally, the rupture discs have a response time of mere milliseconds. To customise the design of the rupture discs for each customer, numerous factors must be considered ahead of time. Reliable and economical rupture discs are not standardised products. Instead, they are individually adapted to the respective process conditions, designed accordingly and then manufactured specifically for the customer’s applications. Numerous parameters are taken into account to ensure optimal performance. Tese parameters include: the medium in the system to be protected (liquid, sticky, gaseous, etc.); the operating temperature for which the rupture disc is designed (room
or maximum operating temperature); the required resistance to vacuum; the mounting method (tri-clamp or holder system); and the required pressure-relief area. As well as pipelines, in the pharmaceutical industry there are additional plant elements, such as reactors, filling plants and tank farms, which must be protected against overpressure and vacuum and equipped with safety-related components. However, protection against impermissible pressures is not the only consideration in the pharmaceutical industry. Leak-tightness and the sterility of the respective components are also critical factors. Finally, reducing downtime is a key requirement with regard to the use of rupture discs. To keep costly system downtime to a minimum, it is essential that the rupture discs can be installed quickly and easily. Rembe’s rupture discs can be installed using a tri-clamp connection, which provides a sterile and extremely reliable seal. When the company developed the KUB clean reverse-acting buckling pin rupture disc, one of its goals was to meet the requirements for sensitive processes in the pharmaceutical industry, such as leak tightness and sterility. Tis reverse acting rupture disc is installed with the bulge facing the process and allows the operator to achieve an operating pressure ratio of up to 98%. Overall, this reverse acting rupture disc is an extremely durable and robust solution that virtually eliminates the risk of premature bursting. Te novel design of the KUB clean is based on a two-layer structure, whereby the side facing the process has a completely smooth surface, which prevents product build-up. Te integrated seal ensures the required degree of tightness for the rupture disc. It meets all hygienic design requirements (FDA and USP Class VI compliant) and is suitable for both CIP and SIP. In addition, the seals can be replaced; the rupture disc can thus be reused immediately after an inspection or cleaning. Each KUB can be optionally equipped with a signalling function. As soon as an excessive overpressure is reached and the rupture disc has burst, signalling becomes a very important safety factor in sensitive production facilities by ensuring that the rupture disc is subject to permanent monitoring.
KUB clean rupture disc with integrated signalling
Stefan Rüsenberg is chief technical officer at Rembe.
www.rembe.de
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56
