Clock Movement & Parts - Movements, Quartz


Tide Movements


A single handed Tide movement. The hand rotates at 12 hours and 25 minutes to the normal 12 hour rotation of other clocks. This is half the lunar cycle of 24 hours 50 minutes which governs high and low tides. Hand supplied separately.


• Tide clock quartz movements • Uses LR6 battery • Complete with fittings • Non Euro Fitting (NEF) hand shafts • 57 x 57 x 16mm • Made in China


Non Euro Fitting (NEF) Hand Collet Dimensions: • Tide hand: Ø5.00mm • Shaft = From movement front to shaft tip


Please note that the 24 hour 50 minutes is an average figure based on a 29 1/2 day cycle. Actual high and low tides may vary due to local wind conditions causing tides to be slightly earlier or later than indicated.


8mm (NEF) Shaft Movement .........J49178 ....£3.95 11mm (NEF) Shaft Movement .......J49179 ....£3.95 13mm (NEF) Shaft Movement .......J49180 ....£3.95 21mm (NEF) Shaft Movement .......J49181 ....£3.95


Cuckoo Clock Movements


• Cuckoo clock quartz movement • Movement and cuckoo bird house supplied • With speaker unit and opening doors • Supplied with plastic cuckoo bird • Fitted with a light sensor so will not sound at night • Loud or quiet volume control • Uses 2 x MN1300 batteries (not included) • For hands see our codes H50876 & H50877


Hand Collet Dimensions: • Minute: Ø3.20mm • Hour: Ø5.00mm


Dimensions: • Movement: 135 x 91 x 47mm (width x height x depth) • Cuckoo house: 95 x 60 x 67mm (width x height x depth) • Cuckoo door plate: 65 x 70mm (width x height) • Shaft length: 10mm


Cuckoo Clock Movement ......J49297 ....£19.95 Case Screw for Movement ....J57860 ......£0.95 FAVOURITE


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16