26 PROJECTS & CONTRACTS
Vinda Personal Care to install another ANDRITZ stock preparation system
V
inda Personal Care has ordered a stock preparation system to feed the four tissue
machines at its Yangjiang mill in Guangdong, China with start-up planned for the third quarter of 2021. Processing a mixture of needle bleached and leaf bleached kraft pulp and bagasse the system will produce up to 200 bdmt/d. Andritz will install the complete system, with equipment for
low-consistency pulping, high- consistency (HC) refining,
approach system and broke handling. The LC pulping system comprises a FibreSolve FSV pulper and a high-density cleaning system for optimum slushing of the raw material. To achieve optimum processing of the mixture of annual and short fibres, the customer opted for a 120 bdmt/d HC refining system for the tissue production line. The combination of an Andritz Pulp Screw Press and an HC refiner, type CDIPL, will
New reeling section for Knauf Petroboard in Russia
Russia’s Knauf Petroboard has ordered a new reeling section from Andritz for the KM2 board machine at its mill in Kommunar. Start-up is scheduled for 2021. The rebuild by Andritz includes
a new PrimeReel with new reel spools, drives and controls for maintaining even paper quality from first to last wrap on the jumbo roll. The new reel will reduce the current level of rejects and enable the use of larger roll diameters, thus resulting in less
frequent tambour changes. The entire wet section (approach flow systems, wire section) as well as the complete electrical drive (MMD) of the KM2 was rebuilt by Andritz in 2018. The board machine – with a basis weight range from 100- 320 grams per sq m, a working width of 4,260mm, and a design speed of 700 m/min – has an annual capacity of 155,000 tons for production of gypsum board made using 100 per cent waste paper as raw material.
enable superior fibre properties at low energy consumption. Andritz has supplied more than
20 stock preparation systems to the Vinda Group in more than 17 years. Vinda Personal Care (Guangdong) is one of the top four tissue producers in China and part of the Vinda Group, which provides high-quality hygiene products and services. Its key brands are Vinda, Tempo, Tork, TENA, Dr P, Libresse, VIA, Libero and Drypers.
Pulp Paper & Logistics
Knauf Petroboard’s new reeling machine will provide more consistent quality
Ash crystalliser added to LD Celulose pulp mill
An ash crystalliser plant is being supplied by Valmet to LD Celulose SA in Brazil. It is part of Lenzing’s and Duratex’s joint venture project to build a new 500,000 ton/year dissolving pulp mill in Minas Gerais state with scheduled start up in 2022.
This is in addition to Valmet’s extensive technology and
September/October 2020
automation contribution to the project announced in January. The ash crystalliser, with a
capacity for 300 tons of ash per day, will recover mill chemicals and remove non-process elements, primarily chloride and potassium, from the mill’s liquor cycle. “Our new pulp mill will have a positive socio-economic impact
throughout the region. When choosing partners for this project we have emphasised reliability, energy efficiency and best environmental practices. We chose Valmet to deliver their ash crystallisation solution because the Valmet concept will fulfil our request in the best way,” says Roland Feiner, chemical recovery implementation manager
at LD Celulose. The new dissolving pulp mill
is located near the cities of Indianópolis and Araguari. With the ash treatment system, the Valmet order now includes a fibre line, a pulp drying and baling line, an evaporation plant, a white liquor plant, an ash crystallisation plant and a mill-wide automation system.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
