JUNIOR BALCONY BOARD


The Ali-Deck Benefits include: ALL ALUMINIUM HEAT RESISTANT


• The ability to cut it to the correct width • It is fire resistant to A2-s1, d0 and A2fl-s1


• You can install 90% of the deck board prior to the installation of the balcony if required, once the balcony is installed you can then install the remaining boards


• The ability to be installed on to existing sub frame sections without having to drill additional holes


• Drainage between the boards 9 DURABLE TEXTURED FINISH LOW MAINTENANCE


We have designed this board to have the ability to cut the board down the length and still be structurally stable under point load, we have also increased the radius on the underside of the board to stiffen the board in the right place to cope with a point load.


RECYCLABLE STABLE IN ALL WEATHER CONDITIONS


A2-s1, d0 & A2fl-s1 FIRE RATED


Fire resistance, these deck boards are manufactured from structural grade T6 (6063) aluminium, and combined with a special textured slip resistant coating they achieve a fire rating of A2-s1, d0 & A2fl-s1 and have been independently tested to EN 13501, EN 13823 and EN ISO 1716.


Dimensions 120mm 20mm


• Installing 90% of the deck boards prior to the installation of the balcony means you would spend less time on site if you are installing balconies. The board is designed to be installed from the top, with a “Slotted” machined centre section, this is designed to enable us to pick up on at least one of the bolt channels in the 3 way bolt channel to alleviate the need for on-site drilling, you can then drop the deck board into place once the balcony is installed using the bolt channels and the threads facing up and simply apply the nuts and tighten up.


. Tel: 01622 235 672 www.alideck.co.uk


• The ability to install onto your existing sub frame section without having to drill additional holes. We have designed a 3 way extrusion, 2 up 1 down, this gives you the option to make sure a bolt can pass through the box section on the existing balcony at any point along the box section and then be secured, we then decide on the channels to slide the bolts into depending on the position of the decking in relation to the position of the box section, you need only choose one bolt channel but having 2 gives the option to never have to drill the decking.


• Drainage between the boards. You have the ability to choose the space between the boards, depending on how quickly you want the water to run off you can choose between 4mm to 10mm between boards (We recommend 6mm as standard).


The board has a cover strip on the top of the board which has a positive click into both sides of the board, it’s a long leg so that any point load and downward loading is adequate, this is a quick fit option that removes most of the problems associated with other composite decking products when installed.


AVAILABLE IN FLAT DESIGN (SEE PAGE 12)


ALSO


The Ali-Deck Junior Balcony board is an engineered solution specifically for balcony installations, it is 120mm wide and 20mm deep it has the following features:


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32