35
Clear cut facades
As glass is increasingly being used to breathe new life into old architectural buildings Simon Boocock, MD of CRL Europe, looks at the benefits of the material and some of the systems available to aid installation and maintenance
being some of London’s most iconic buildings, they are also all clad in glass. The reasons for using glass as part of the external structure of such architecture are numerous. From an aesthetic viewpoint, few materials can compete with glass in creating a high-end, minimal look. From a practical stance too, glass offers many advantages. It is a versatile solution that provides all-weather protection which is all-important with the UK’s notoriously inclement climate. All of these benefits make glass not only
W
suitable for cladding new buildings, but for protecting old architecture too and, thanks to new installation methods, glass is increasingly being used to regenerate buildings, preserving the original materials while allowing the beauty of the building to shine through. In modern architecture, the glass curtain
wall is typically thin and framed with aluminium or steel, which is mounted on the external structure of a building, providing protection against air, water and wind. Providing a safe installation method, a clip system, such as that seen on the
hat do the Shard, the Gherkin and the skyscrapers of Canary Wharf have in common? Aside from
The CRL Langle Al-Wall®
system is ideal to regenerate an existing building, creating a modern impression with a highly durable and long-lasting finish CRL Langle Al-Wall® joins individual
glass panels and securely fixes them in place, completely eradicating the need for glass cut-outs which can often require a lengthy, costly and detailed installation process. Importantly, good ventilation of
the building is also achieved, ensuring that it is safe for occupants. For much the same reasons, glass is also increasingly being chosen for exterior balconies and balustrades to improve the aesthetics of the building itself and increase the occupant’s outdoor view. Systems that need to be fitted from the
outside typically require scaffolding, which can add to the time and expense of a project, and are overall much trickier to install than systems that can be fitted from an internal position. Posing similar issues, traditional wet fit balcony systems need to be held securely in place, usually with cement, to ensure a tight fit, which can be messy too, particularly when fitting the balcony retrospectively on to a building or when changing a broken glass panel. A dry-glazed railing system, such as that from CRL, is a hassle-free alternative to working with cement and scaffolding as it can be installed from the safe side of the balcony or balustrade, cuts installation times and provides safety and security for all. For more details email
crl@crlaurence.co.uk
TAPER-LOC®
frameless glass balustrade system from CRL can be installed from the ‘safe-side’ of the balustrade, avoiding the need for time-consuming and expensive scaffolding
01706 863600
www.crlaurence.co.uk
ADF FEBRUARY 2020
WWW.ARCHITECTSDATAFILE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
