In contrast, aluminium is a versatile metal that can be precision-engineered to provide a very finely grooved surface for outstanding anti-slip performance in the direction of travel.

Lifespan is also a vital stipulation for housebuilding warranty providers. In the NHBC’s technical guidance, Clause 7.1.4a states that structural elements of balconies should have a desired service life of at least 60 years. This is problematic for timber, which is vulnerable to woodworm, damp, mould and rot. The guidance states that timber can be used to form raised decks if it follows one of two routes to compliance: it must be designed and constructed in full accordance with relevant guidance documents published by TDCA, or designed by an engineer in accordance with Technical Requirement R5 with a desired service life of 60 years.

Architects can avoid jumping through all of those hoops by avoiding wood-based materials altogether and opting instead for aluminium, which is corrosive-free and has a recognised design life of at least 60-100 years. One report has suggested that it has an infinite lifespan in internal installations, and a minimum lifespan of 120 years in external installations. It provides a maintenance-free decking solution that avoids all of the cost and labour of ongoing treatment that are necessary to prolong the lifespan of its more traditional rivals.

Another clear advantage of aluminium decking is its structural efficiency – in other words, it is lightweight (a third of the weight of steel) yet high in load-bearing strength. Aluminium decking panels are typically around 16 kg per m2 compared to over 25 kg per m2

or lower, for leading WWW.ARCHITECTSDATAFILE.CO.UK

wood-polymer composite products. This difference is increasingly important for cost reasons: due to fire safety concerns, steel joists are now widely used instead of timber joists, but steelwork is expensive so substantial savings can be made by using decking that needs less structural support. Many balconies conventionally use ‘positive drainage’ – a catchment tray that is installed directly below the decking, encased within a soffit and fitted with a hopper and drainpipe. It is cumbersome, costly and laborious to construct, and vulnerable to blockages caused by the accumulation of dirt, sediment and waste substances.

Aluminium grille decking can facilitate an alternative ‘eaves drop’ drainage method which is increasingly favoured by housebuilding warranty providers. The rainwater falls directly into a ‘French drain,’ a ground-level trench comprising a perforated pipe, which is installed below the ground and topped by a layer of pea gravel. Surface water seeps between the gravel and passes freely through the pipe. It’s an efficient way to divert water away from the building and avoid pooling. Compared with positive drainage, aluminium decking with a French drain is a lighter, more economical combination, which is faster and easier to install. All things considered, it’s easy to see why wood-based decking is in decline. By specifying aluminium instead, architects and developers have found a way to fast track the compliance of their projects and, more importantly, improve the safety and performance of their buildings.

Steve Howard is the sales office manager at Neaco


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52