CASTING ~ MOULD MAKING, Silicone Rubber


Econo-Sil


• 5lb strips (2.27Kg) • Econosil is the fast & easy way to mould and cast almost anything in metal


• Hard, firm, flexible & low cost • Firmer moulds mean less variation in final cast weights, greater detail and less distortion • Moulds compress less during injection and thus avoid squeezing off wax flow through thin channels


• Ideal for filigree and other fine details • Rubber shrinkage is only 1.1% • Moulds made of Castaldo Econosil cut like butter & give waxes with a high shine finish


Strip


• Waxes self-release easily, no spray or powder required! • Excellent for low temperature metal direct casting • It can be used to cast lead, pewter, tin, zinc and other low temperature melting alloys


Ref Price 5lb Strip ..... C52340 ...£35.95


Quick-Sil


A two part silicon putty enabling you to make moulds without the use of a vulcaniser or heat source. Zero shrinkage and cures in 15 minutes!


• Strong, long lasting silicone rubber moulds • They can produce dozens or hundreds of injections, depending on the complexity of the design • They do not deteriorate or become soft over time but instead last for decades • Perfect for production moulds or the last minute, one off emergencies • It is a two-part room temperature vulcanizing silicone rubber putty that is easily mixed by hand • Moulds cure ready-to-use with 0% rubber shrinkage in only 15 minutes at room temperature


• No careful measuring • No messy liquids • No vacuuming • No 12 to 24 hour wait for finished moulds • No vulcaniser required • No release sprays needed, it is self lubricating


Kit Ref Price


100g Kit ...... C52338 .....£7.95 1kg Kit ...... C52339 ...£49.95


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16