PRODUCTS & EQUIPMENT
number of needs. The extra flexibility is demonstrated by the possibility of making parts which were once thought to be geometrically impossible. The reworking potentials, previously experimented on the E-FLEX, are used to manage bending sequences very dynamically and
avoid impossible geometries. Some parts deemed infeasible because of the collisions generated during machining can be made by DH4010VGP by modifying the order of various steps in the bending sequence. This clever yet simply capability facilitates the operator’s work making it possible to process an
increasingly higher number of complicated parts.
Part feasibility also allows
the possibility of minimizing the length of straight parts and the DH4010VGP has answers for this issue as well. The handler that turns the wire length being processed can retract and clear the working field. This allows the
bending heads to move very near each other and make very close bends. Higher system productivity is
also guaranteed by optimized dynamics and cycles. For instance, the wire cutting and end-forming unit is fitted on a carriage having linear movement independent from the heads. This additional innovation contributes to increasing the productivity of the DH4010VGP by approximately 30% with respect to older systems. The tried-and-trusted VGP3D
programming and control software, with its three- dimensional graphic interface and easy programmed collision simulation and control system, is used.
For more information:
Giovanni Zacco – Communication BLM Group
E-mail:
pr@blmgroup.it Tel.: +39 031 7070200
www.blmgroup.com www.inspiredfortube.com Facebook: http://www.facebook. com/BLMGROUP
Hydro Precision Tubing Tonder selects – Banyard LFi Smart System
Inductotherm - Banyard are pleased to announce the successful contract for supply to Hydro Precision Tubing Tonder (HPTT) plant in Denmark, with imminent dispatch of 2 x Banyard LFi Smart systems, which consists of 2 x Zero Friction, Multi-layer, Multi Zone coil Induction Heaters for 9” aluminium billets, to work with HTPP’s P25 press upgrade programme - The Heaters are each 750 kW and the system includes Cold Billet Positioning Systems, Overhead Manipulator and full Control Interface to the press. The HPTT project team has worked closely with the Banyard project team to fully assemble the equipment in UK, to facilitate a quick install in Denmark. In the
forthcoming weeks representatives of HPTT will be visiting the Banyard manufacturing facility at Inductotherm Heating & Welding in Basingstoke UK, to conduct the Supplier Acceptance Tests before the system is carefully dismantled and loaded ready for shipping. The full installation and commissioning
will be completed in Denmark, during the summer of 2018. Inductotherm – Banyard will celebrate 50 years continued service to the Aluminium Industry in 2019, we look forward to meeting existing and new customers at Aluminium Dusseldorf 2018 and present the latest generation of LFi
www.internationalmetaltube.com
Smart System for your extrusion process. For further information, please contact: Inductotherm Heating & Welding Ltd T: +44(0)1256 335533 or e: Amanda Tarbart – atarbart@
inductothermhw.co.uk w:
http://www.inductothermhw.com
IMT June 2018 21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
