PRODUCTS & EQUIPMENT
PROTEM
motor. What is the best drive in this case? PROTEM proposes three different types of motors to best meet your needs; pneumatic, hydraulic or electric. The budgetary constraints, the availability of a compressor, on-site machining, the compact design for tight spaces; all these factors will determine your choice of motor. The power of these motors varies. For example, for heavy- walled tubes, a double hydraulic or pneumatic drive should be considered. To be able to do perfect and
efficient machining, the motor is fundamental to maximizing your production.
They can be set up easily. Because of their light weight, they can be used by a single operator. The Clamping System: Machining performed with the right clamping system will have significant impact on the execution speed and the machining quality. To learn more about different clamping systems, we invite you to consult the article,
Tube Clamping During Machining Operations.
Automatic Feed: Weld joint extraction and beveling operations on heat exchangers takes a lot of time and requires the right technology. The US-TP series are fully automated beveling machines. The clamping and the feed are automatic and adjustable.
The automatic feed offers a significant time reduction. With this technology, you will drastically increase your productivity.
5. The right motor for higher production An electric drive that gets hot after two bevels! Your machine probably doesn’t have the right
6. Simultaneous machining operations When we look at the market most beveling machines have a tool holder with two or three tools on it. In the standard version, the tool
holder on the PROTEM beveling machine can accomodate four tools. Machining operations, such as
facing, beveling and counterboring can be carried out simultaneously. Two or more tool bits used simultaneously ensure a perfect balance of forces during the machining operation. Other machining operations
can be done, such as, performing compound bevels on heavy pipes, removal of weld joints on tube sheets and/or cutting tubes to length on tube sheets. Saving time will be important, particularly for applications that machine thousands of tubes, like heat exchangers, for example.
7. Use the right cuttin tools PROTEM offers a large range of cutting tools that make a variety of angles and specific shapes (I, V, J, X, compound bevels, counterboring, etc.). Carbide or HSS tool bits ensure a perfect welding preparation.
www.internationalmetaltube.com IMT March 2018 9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
