TECHNOLOGY NEWS New Wireless System from AKG
AKG INTRODUCED the DMSTetrad digital wireless microphone system. This licence-free system features an integrated four-channel mixer and an antenna front mount kit. With 24-bit, 48kHz audio
coding, it provides uncompressed transmission and a linear frequency response
for vocal and instrumental performances. The DMSTetrad’s 128-bit AES standard encryption prevents tapping of the audio signal. The entire DMSTetrad
system features the DSRTetrad digital stationary receiver, the DPTTetrad digital pocket transmitter, and the DHTTetrad digital
handheld transmitter, available with AKG’s D5 acoustics or as DHTTetrad P5 with standard dynamic capsule. Two sets are available, the DMSTetrad Vocal Set including the DHTTetrad P5, and the DMSTetrad Performer Set including the DPTTetrad together with a C111 L earhook microphone and the
Powersoft Offers X Series
THE POWERSOFT X Series amplifier integrates a system of channel routing, a universal mono, bi, and three-phase balancing power supply, and a fully featured DSP. The X Series consists of two models. The X8 is the largest
amplifier in the range, boasting eight channels in a 2U chassis, while the X4 features four channels in a single rack unit. Both models share the same power density, being capable of delivering up to 5,200W at 2 ohms per channel.
The X Series natively
supports AES3, two redundant Dante by Audinate digital streams, and analogue inputs, providing up to four different selectable input sources per channel.
The X8 and X4 are suitable for both low and high impedance applications. The modular construction permits the rear input/output connections to feature either XLR/speakON or Phoenix connectors.
www.powersoft-audio.com
MKG L instrument cable. The DSRTetrad receiver
can work with up to four channels of audio in parallel which can be mixed down directly to its balanced XLR sum output. The dynamic
frequency selection (DFS) ensures that only the cleanest frequency bands are selected for the connection between receivers and transmitters automatically.
www.akg.com
DiGiCo D2-Rack
PROLIGHT + SOUND saw DiGiCo launch its new D2- Rack. Designed to support and expand the higher sample rate I/O solutions of DiGiCo’s SD Range, the D2-Rack comes with either BNC or Cat5 MADI connections, allowing it to be used with a number of DiGiCo consoles. By using the latest convertors found in DiGiCo’s SD Racks, the D2-Rack offers connection at either 48kHz or 96kHz with no I/O reduction.
The D2 Rack is currently available for use with SD8 and SD9 systems.
www.digico.biz
8 April 2014
www.audiomedia.com
New at Prolight + Sound
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52