• Each unit is a dimmer, relay switch & 2-button transmit- ter depending on programming to control incandescent, fluorescent, inductive & magnetic LV loads
• Pre-programmed w/7 preset scenes w/light level to create inviting moods and can be a member of 16 different scenes
A
P5-WS1D6 (WS1D-6) Remote Wall Switch
• Designed to provide three-way or multi - way lighting control for a WS1 wall switch
• Available in seven colors
• 5 Year Warranty and 1 year money-back guarantee P5-RWS (RWS) B. PulseWorx®
Keypad Controller 6 Button
• Pre-programmed to trigger 6 preset scenes with inviting light levels to create moods
B
• LED tracking enables true status indication of scenes and devices
• Each Button will operate in one of 16 specific modes and initiate commands from a single tap double tap, press or release
P5-KPCW6 (KPCW-6) C. PulseWorx®
• The tool to use with a computer to configure UPB devices with UPStart™
RS232 Powerline Interface Configuration Software
• For a front-end controller to control UPB based units • Plugs into any standard 120VAC electrical outlet
C
• Connects to any available COM port via a DB9 serial cable (incl.)
P5-PIMR (PIM-R) D. PulseWorx®
Passive Phase Coupler
• Designed to enhance the communication reliability of UPB signals
• Proper design of a system will have one in each electrical panel with lighting control
D
• Provides a path for signal to cross to other phase in a typical split-phase (single-phase) 240VAC home
P5-PPC1 (PPC-1) E. PulseWorx®
120/240V Split Phase Repeater (Image not shown)
• Designed for larger systems to guarantee certified communication signal strength
• Use in homes over 5,000 sq. ft or with more than 3 electrical panels
• Re-transmits signals from one phase to the other at full strength
F
• Wires phase to phase and to neutral P5-SPR1 (SPR-1)
F. PulseWorx® X-10 to UPB Bridge
• Enables any Security Panel or Controller that communicates X-10 to communicate UPB
• Plug and Play A1 On = Link 1 Activate P5-PW513 (PW513)
G. PulseWorx® G 6-Zone Retrofit Lighting Package
• All items needed initially set up a 6-zone lighting system • Items are pre-programmed with 7 basic scenes
• Manually changing the existing scenes is a simple 1-2-3 process
• Use UPStart™ P5-RLK6 (RLK-6) FOR ORDERS, CALL 800.233.6261 FOR SYSTEM SALES AND SUPPORT, CALL 800.234.7971 WWW.ADIGLOBAL.COM/US 483 Configuration Software to fully customize all characteristics of buttons and scenes