AGG / Grippers for Engagement

Grippers for Engagement

The AGG30 is used to provide precise centering and clamping between the robot and the mold. This is necessary, for example, when metal inserts must be placed in the mold, before plastic injection. The gripper AGG30-B is mounted on the EOAT and the steel brushing AGG30-C on the mold. After the robot approaches the mold, the AGG30-B is pressurized so it closes and engages the AGG30-C. With 6bar compressed air the necessary pulling force to disengage it is higher than 300N. A safety spring keeps the device engaged in case of a compressed air failure. In this case a pulling force of 1400N is necessary to disengage.

Quick #

6689

6690

Part #

AGG30-B AGG30-C

Price Wt.

$360.89 380g

$20.30 75g

AGG30-C AGG30-B

Sensor Slot Detail

Call 216-535-4848 to order. 58 64 Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73