This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
• Fits LT1000 series 50’ decks using round center hole blade • Use with Oregon® 45-205 bearing & 45-206 race
618-04129 3.125 [79.38mm] 6.188 [157.16mm]
5.000 [127.00mm]
.813 [20.64mm]
82-406 Replaces
618-04394 618-04426
Description
• Fits Z-Force mowers with 48" thru 60" deck using round hole blade • Use with Oregon 45-205 bearing & 45-206 race
82-407 Replaces
918-04461 618-04461
Description
• Fits LT series mowers with 42" deck using star hole blade • Use with Oregon 45-259 bearing & 85-047 spindle shaft
5/8 - 18 UNF THREAD
82-058 Replaces
918-04822A 918-04822 918-04889A
Description
• Fits mower models CC30 Mini Rider (2014), LTX1040 (2011–2014), LTX1042 (2012–2014), LTX1045 (2011), RZT-42, RZT-L42, & RZT-S42 (2011–2014), • For star center hole blades
82-043 Replaces
918-05016 618-05016
Description • Fits models LTX1050 with 50" deck (2011-2013)
5/8 - 18 UNF THREAD
918-04825 618-04825B
5.432 [137.98mm]
5/8 - 18 UNF THREAD
.875 [22.23mm] .395 [10.04mm]
5/8 - 18 UNF THREAD
918-04889 618-04822A 618-04822
618-04889A 618-04889
6.125 [155.58mm]
5/8 - 18 UNF THREAD
618-04456 918-04456
6.250 [158.75mm]
5/8 - 18 UNF THREAD
1.000 [25.40mm]
918-04394 918-04426
2.125 [53.98mm] 4.375 [111.13mm]
3.000 [76.20mm] 1.125 [28.57mm]
2.000 [50.80mm]
5.750 [146.05mm]
1.000 [25.40mm]
1.750 [44.45mm]
6.375 [161.93mm]
4.60 [116.84mm]
IMPORTANT: When installing spindles, follow all installation and maintenance instructions provided in the mowers owner/maintenance manual— including the correct torquing of the blade and pulley bolts/nuts as well as the lubrication of the spindle. Failure to do so may cause premature failure.