® Steel Products STORING FLAMMABLE LIQUIDS
When storing flammable liquids there are strict adherences concerning separation distances that the flammable liquids must be stored from; occupied buildings, boundaries, process units, flammable liquid storage tanks and or sources of ignition.
If you can achieve the relevant distance you can use a standard single skinned, fully bunded storage unit to hold your flammable liquids. If you can’t achieve the relevant distance the storage unit needs to be constructed to provide a minimum of 30 minutes fire resistance to comply with UK legislation.
Volume of liquid separation distances: • Up to 1000ltr - 2 metres • 1000ltr to 100,000ltr - 4 metres • Above 100,000ltr - 7.7 metres
Some questions you should consider:
Is there good natural air movement in and around where the flammable substances are stored and used? If not you may have to consider mechanical air changes. Good ventilation will mean that any vapours given off from a spill, leak, or release will be rapidly dispersed.
Have all the obvious ignition sources been removed from the storage and handling areas? You need to think outside the box as an ignition source can be very varied; sparks from electrical equipment, welding or cutting tools, hot surfaces, open flames, static charge etc. An explosion can even be caused by the simple action of decanting a flammable liquid from one container to another if they have not been earthed.
If there is a spill will it be contained and prevented from spreading? Consider what will happen if the liquid is spilled when it is outside the bunded storage unit.
Can you replace a flammable substance for a less flammable one, or can you eliminate it from the process completely? Processes and products evolve, check with your supplier to see if they have non-flammable alternative or can help you redesign your process to make it safer.
Are your flammable substances stored and used in a different area to other processes? By separating them you will lessen the risk of an incident and improve workplace safety. Flammable liquids should be stored separately from other dangerous substances that may enhance the risk of fire or compromise the integrity of the storage unit, for example; oxidizers and corrosive materials should be stored separately from each other. Remember other dangerous substances may also be flammable in their own right however, it is still inappropriate to store them with other flammable liquids.
For further guidance on energetic and spontaneously combustible substances please consult HS (G) 131 published by the HSE.
In the event of an incident the objective is to ensure that people can safely escape from the working area and in this context, the purpose of storing dangerous substances in the appropriate storage unit is to provide a physical barrier to delay the involvement of the stored liquids in any fire and provide sufficient time for people’s safe evacuation and the immediate implementation of emergency procedures.
It’s important not to overlook any aspect associated with the safe handling of flammable liquids such as static discharge during filling / decanting, combustion due to excessive heat build-up, potential ignition sources such as a spark from a tool or electrical component and pressure build-up in a container.
Please remember to consult with your insurance provider and local authority fire brigade as they will have valuable input that could save you time and money going forward.
18
www.empteezy.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24